Berger SATA 10.5
Built: 2015 · Series: Other models
More machines from model year 2015
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Berger – other models: the collective page of heavy O4-class semi-trailers and low-loaders outside the named ranges, 10.5 to 44 tonnes gross weight, up to over 14 metres long
This page gathers the Berger trailers the register could not assign to a named range. With gross weights from 10.5 to 44 tonnes and lengths of over 14 metres, these are heavy O4-class semi-trailers and low-loaders. The type codes SA, SAT, SATA, LT and N mark different build lines, supplemented by a number for the axle count or load class; the ending E in designations such as LTE or LTOE marks a further equipment level within the given line.
Read on 3 more paragraphs
The register lists here 22 versions with unladen weights from 3,000 to 7,360 kg, gross weights from 10,500 to 44,000 kg, lengths from 8,900 to 14,044 mm and widths from 2,510 to 2,550 mm.
Semi-trailers and low-loaders of this size transport construction machinery, containers and heavy loads, competing with ranges from makers such as Goldhofer, Faymonville and Nooteboom; the span from 10.5 to 44 tonnes gross weight runs from simple two-axle low-loaders to multi-axle versions for especially heavy loads.
On a used example, the condition of the frame and the kingpin bearing plate, axles, brakes and tyres, the function of the hydraulics on lowering versions, the ramps and locks, and the lighting and underrun-guard system count; on the longer low-loaders, also frame deflection under load. Spare parts run through the specialist commercial-vehicle trade.
Sources: SpecCodex register, model data: Berger (weitere Modelle)
Technical data
Dimensions and weights
| Length | 10,750 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 7,320 mmcorrect |
| Unladen weight | 5,870 kgcorrect |
| Gross vehicle weight | 39,000 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Berger SATA 10.5 weigh?
The unladen weight is 5,870 kg.
What is the gross vehicle weight of the Berger SATA 10.5?
39,000 kg.
Up to what speed is the Berger SATA 10.5 approved?
Approved up to 100 km/h.
What are the dimensions of the Berger SATA 10.5?
10,750 mm × 2,550 mm.
When was the Berger SATA 10.5 built?
Production years: 2015.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
