Berger SAPL 24LT – specifications
Built: 2007 · Series: Other models
Data for the version built 2007 · Data origin: Official register · sources
More machines from model year 2007
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Berger – other models: the collective page of heavy O4-class semi-trailers and low-loaders outside the named ranges, 10.5 to 44 tonnes gross weight, up to over 14 metres long
This page gathers the Berger trailers the register could not assign to a named range. With gross weights from 10.5 to 44 tonnes and lengths of over 14 metres, these are heavy O4-class semi-trailers and low-loaders. The type codes SA, SAT, SATA, LT and N mark different build lines, supplemented by a number for the axle count or load class; the ending E in designations such as LTE or LTOE marks a further equipment level within the given line.
Read on 3 more paragraphs
The register lists here 22 versions with unladen weights from 3,000 to 7,360 kg, gross weights from 10,500 to 44,000 kg, lengths from 8,900 to 14,044 mm and widths from 2,510 to 2,550 mm.
Semi-trailers and low-loaders of this size transport construction machinery, containers and heavy loads, competing with ranges from makers such as Goldhofer, Faymonville and Nooteboom; the span from 10.5 to 44 tonnes gross weight runs from simple two-axle low-loaders to multi-axle versions for especially heavy loads.
On a used example, the condition of the frame and the kingpin bearing plate, axles, brakes and tyres, the function of the hydraulics on lowering versions, the ramps and locks, and the lighting and underrun-guard system count; on the longer low-loaders, also frame deflection under load. Spare parts run through the specialist commercial-vehicle trade.
Sources: SpecCodex register, model data: Berger (weitere Modelle)
Technical data
Dimensions and weights
| Length | 13,620 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Unladen weight | 3,900 kgcorrect |
| Gross vehicle weight | 39,000 kgcorrect |
Frequently asked questions
How much does the Berger SAPL 24LT weigh?
The unladen weight is 3,900 kg.
What is the gross vehicle weight of the Berger SAPL 24LT?
39,000 kg.
What are the dimensions of the Berger SAPL 24LT?
13,620 mm × 2,550 mm.
When was the Berger SAPL 24LT built?
Production years: 2007.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
