Start › Excavators & compaction › Bell › HD1023 Mark 3

Bell HD1023 Mark 3

Series: Bell Hydraulic Excavator

Source: https://www.lectura-specs.com/en/model/construction-machiner

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Bell HD1023 Mark 3 is a model in the Bell Hydraulic Excavator series. The engine delivers 170 hp (125.1 kW). The unladen weight is 23,570 kg. Ground clearance is 481.6 mm. The pump delivers 494.4 l/min. Working pressure is 329 bar. The engine fitted is the C 6D34-TLE2A. Rated output across the Bell range ranges from 149.6 to 385.3 hp; the HD1023 Mark 3 sits at the bottom of that range with 170 hp. Its immediate neighbours are the HD820 Mark 3 below it with 149.6 hp and the B18 6x6 above it with 172.4 hp. 31 Bell models across 5 series are on record. The model is listed under Excavators & compaction. 7 verified figures from 1 source are on file.

Technical data

Engine

Engine model	C 6D34-TLE2Acorrect
Power	170 hp (125.1 kW)correct

Dimensions and weights

Ground clearance	481.6correct
Unladen weight	23,570 kgcorrect

Working data

Pump flow	494.4 l/mincorrect
Hydraulic pressure	329 barcorrect

Where this model stands

Power-to-weight ratio: 5.3 kW/t (125 kW / 23.6 t)

Stronger than 60% of the excavators & compaction in the register — out of 1,666 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Bell HD1023 Mark 3 have?

The Bell HD1023 Mark 3 delivers 170 hp.

How much does the Bell HD1023 Mark 3 weigh?

The unladen weight is 23,570 kg.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Check the weights in the papers against the figures here — attachments change them.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →