Belarus 920R
Series: 900
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Belarus 920R: the tractor of the 900 range from the Minsk Tractor Works, four-cylinder with 60 kW (81 hp), 298 Nm torque, 4,420 kg unladen weight
Belarus is the export brand of the Minsk Tractor Works (MTZ), which has built tractors in the Belarusian capital Minsk since 1946 and, with several million units produced, ranks among the world's largest tractor makers; the brand supplies more than 100 countries, with strongholds in Russia, the successor states of the Soviet Union, Africa and Latin America. The 900 range is among the plant's smaller wheeled tractors.
Read on 3 more paragraphs
The 920R carries a water-cooled four-cylinder diesel engine of 4,750 cm³ displacement, producing 60 kW (81 hp) at 2,200 rpm and developing 298 Nm of torque – an engine that belongs more to the mid class of general-purpose farm tractors than to the large field tractors. With an unladen weight of 4,420 kg, a wheelbase of 2,450 mm, a length of 4,120 mm, a width of 2,370 mm and a height of 3,030 mm, it reaches a top speed of 27.9 km/h.
At 27.9 km/h the 920R falls under driving licence category L, which covers design top speeds up to 40 km/h; the PTO follows the standardised speeds of 540 or 1,000 rpm, and the three-point hydraulics follow ISO 730 in the mid categories. A four-cylinder of this displacement is built for work with a front loader, mower and lighter tillage implements in everyday farm use.
When buying second-hand, the operating hours, the condition of the injection pump, wear on the clutch and shuttle transmission, and the tightness of the hydraulics and PTO clutch after years with changing implements all matter. Rust on the mudguards and cab, together with a traceable maintenance history, give further insight into how hard the machine has been worked.
Sources: SpecCodex-Register: Kennwerte des Modells Belarus 920R, Minsker Traktorenwerk (MTZ, Hersteller)
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 81 hp (60 kW)correct |
| Rated speed | 2,200 rpmcorrect |
| Torque | 298 Nmcorrect |
| Cylinders | 4correct |
| Displacement | 4,750 cm³correct |
| Cooling | water-cooledcorrect |
Dimensions and weights
| Length | 4,120 mmcorrect |
|---|---|
| Width | 2,370 mmcorrect |
| Height | 3,030 mmcorrect |
| Wheelbase | 2,450 mmcorrect |
| Ground clearance | 715 mmcorrect |
| Unladen weight | 4,420 kgcorrect |
Drivetrain and chassis
| Drive | four-wheel drivecorrect |
|---|---|
| Top speed | 27.9 km/hcorrect |
Origin and approval
| Construction | Halbrahmecorrect |
|---|
Where this model stands
Power-to-weight ratio: 13.6 kW/t (60 kW / 4.4 t)
Power class: Universal (40–100 hp)
Stronger than 56% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Belarus 920R have?
The Belarus 920R delivers 81 hp.
How much does the Belarus 920R weigh?
The unladen weight is 4,420 kg.
What engine does the Belarus 920R have?
4 cylinders, 4,750 cm³ displacement, Diesel.
How fast does the Belarus 920R go?
Top speed is 27.9 km/h.
What are the dimensions of the Belarus 920R?
4,120 mm × 2,370 mm × 3,030 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 18 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.