Tiki CP410-DRBH
Built: 2024 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Dimensions and weights
| Length | 5,526 mmcorrect |
|---|---|
| Width | 2,296 mmcorrect |
| Unladen weight | 539 kgcorrect |
| Gross vehicle weight | 2,750 kgcorrect |
Frequently asked questions
How much does the Tiki CP410-DRBH weigh?
The unladen weight is 539 kg.
What is the gross vehicle weight of the Tiki CP410-DRBH?
2,750 kg.
What are the dimensions of the Tiki CP410-DRBH?
5,526 mm × 2,296 mm.
When was the Tiki CP410-DRBH built?
Production years: 2024.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
AP2600-DRB
AP2600-DRB/N
B-30TL
BP1000-RB
BP1400-LB/2JET
BP1600-LB
BT-25008
BT-2500BP
Bs 1250-Rb
C211
CP250-RB
CP300-LBH
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.