Stema ST O1-1
Built: 2014 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Dimensions and weights
| Length | 3,090 mmcorrect |
|---|---|
| Width | 1,730 mmcorrect |
| Unladen weight | 220 kgcorrect |
| Gross vehicle weight | 750 kgcorrect |
Frequently asked questions
How much does the Stema ST O1-1 weigh?
The unladen weight is 220 kg.
What is the gross vehicle weight of the Stema ST O1-1?
750 kg.
What are the dimensions of the Stema ST O1-1?
3,090 mm × 1,730 mm.
When was the Stema ST O1-1 built?
Production years: 2014.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
01
115 X 200 N2005
290/154
AA
B500
BH 750 EG
Basic 6075
EP6070
HP 550
HP 6070
HP 6070 CB3
HP 6070-2.05M/2000
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.