Renders ROC 16.27 K
Built: 1999 · Series: Other models
More machines from model year 1999
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Renders – other models: the collective page of trailers and semi-trailers from the Dutch manufacturer outside the named ranges, 740 to 16,780 kg unladen weight, up to 48,000 kg gross weight
This page gathers trailers and semi-trailers of the Renders brand that the register could not assign to a named range. Renders is one of the Dutch semi-trailer builders that has for decades built tippers, flatbeds and box semi-trailers for road haulage; no consistent naming scheme can be read from the holdings, the type codes alternate between axle-load codes and range codes such as RAC, F08 or the N0x series.
Read on 3 more paragraphs
The register lists here 145 versions with unladen weights from 740 to 16,780 kg, gross weights from 2,000 to 48,000 kg, lengths from 4,900 to 15,850 mm and widths from 2,380 to 2,600 mm.
The span thus runs from light single-axle trailers to three-axle semi-trailers in the standard dimensions of European long-haul transport; Renders competes in this segment with larger Dutch and Belgian semi-trailer builders such as Pacton, Groenewegen or LAG.
When buying used semi-trailers of this size, what counts is the condition of the frame and cross members (rust, weld cracks), axles and braking system (drum or disc, ABS/EBS), the condition of the curtain or sides, the operation of the landing legs and kingpin, and complete inspection records; on tipper semi-trailers, additionally the hydraulic rams and tipping mechanism.
Technical data
Dimensions and weights
| Length | 11,050 mmcorrect |
|---|---|
| Width | 2,450 mmcorrect |
| Unladen weight | 4,860 kgcorrect |
Frequently asked questions
How much does the Renders ROC 16.27 K weigh?
The unladen weight is 4,860 kg.
What are the dimensions of the Renders ROC 16.27 K?
11,050 mm × 2,450 mm.
When was the Renders ROC 16.27 K built?
Production years: 1999.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 4 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.