Technical register for agricultural, construction and commercial machinery · sourced data

KAESER M 51 – specifications

Built: 2000 · Series: Other models

Data for the version built 2000 · Data origin: Official register · sources

More machines from model year 2000

Source: il.kaeser.com

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

M 51 comes from the manufacturer KAESER. According to the available register data, the vehicle dates from 2000. The car trailer is 3,400 mm long and 1,480 mm wide. Its kerb weight comes to 950 kg. The permitted gross weight is 1,030 kg. The Finnish vehicle register lists one example of this model.

Kaeser – other models: towable compressors from the German manufacturer on car-trailer chassis outside the named ranges, M range and Mobilair from 0.54 to 2.75 t

Kaeser Kompressoren of Coburg, alongside stationary units, also builds towable compressors mounted on trailer chassis for mobile use on building sites. This page gathers the models outside the named ranges, mainly the M range (M36 to M135) and the versions marketed as "Mobilair"; "PE" denotes variants with Kaeser's Sigma-profile screw compressor block. The three-digit model number at Kaeser usually corresponds to delivery volume in cubic metres per minute.

Read on 3 more paragraphs

The register lists here 59 versions with unladen weights from 535 to 2,750 kg, gross vehicle weights from 750 to 2,750 kg, lengths from 2,317 to 5,060 mm and widths from 1,300 to 2,075 mm.

Trailer compressors of this size work on building sites, in road and civil engineering, and at plant-hire firms, supplying pneumatic hammers, sandblasting equipment or pneumatic tools without the need for a separate vehicle with a built-in compressor. Kaeser competes there with Atlas Copco and Compair, which offer comparable trailer compressors.

When buying used, the operating hours of the compressor block matter, along with the condition of the oil cooler and intake filter, the tightness of the air hoses and valves, the condition of the chassis, axle and drawbar, and a valid trailer inspection. Wear parts such as filters, oil separators and belts are available through Kaeser's service network and independent compressed-air specialists.

Sources: SpecCodex register, model data: Kaeser (weitere Modelle), Kaeser Kompressoren (manufacturer), Zulassungsdaten Traficom (Finnland)

Technical data

Dimensions and weights

Length3,400 mmcorrect
Width1,480 mmcorrect
Unladen weight950 kgcorrect
Gross vehicle weight1,030 kgcorrect

Frequently asked questions

How much does the KAESER M 51 weigh?

The unladen weight is 950 kg.

What is the gross vehicle weight of the KAESER M 51?

1,030 kg.

What are the dimensions of the KAESER M 51?

3,400 mm × 1,480 mm.

When was the KAESER M 51 built?

Production years: 2000.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.​⁠⁠​​‍​​‍​⁠​‌‍​‍‌‍‌⁠

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.

Check and complete the data →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · Data sources and cross-checks

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare