Indespension MONARQUE / 255+75 – specifications
Built: 2000 · Series: Other models
Data for the version built 2000 · Data origin: Official register · sources
More machines from model year 2000
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Indespension – further models: collective page for British trailers outside the named ranges, Roller Coaster, Dipper and Plant Trailer, unladen weight 225 to 890 kg, length up to 7.75 m, gross weight up to 2,800 kg
This page gathers trailers from the British brand Indespension that the register could not assign to a named range. Indespension is a British maker of utility and transport trailers; the model names show several product lines, including the Roller Coaster or Rollercoaster boat trailer series with suffixes such as 1.3, 5 Braked and 10, the Dipper range, the Plant Trailer for construction machinery, and individual models Challenger G20850M and Monarque.
Read on 3 more paragraphs
The register lists here 16 versions with unladen weights from 225 to 890 kg, gross weights from 1,100 to 2,800 kg, lengths from 4,150 to 7,752 mm and widths from 1,760 to 2,287 mm.
The range from compact boat trailers to long Plant Trailers for excavators and other construction machinery shows the breadth of the British class O2 utility trailer market; with lengths of over 7.7 metres, the larger Indespension models count among the long units for boats, machinery or long loads.
Buying a used boat trailer, check the condition of the keel rollers and support brackets and corrosion on the load arms, as these take heavy strain in saltwater use. On the Plant Trailers, check the condition of the ramps, tie-down points and frame under building-site conditions. In general, check the axle and brake, the lighting to British standard and tyre age; as an established maker, Indespension parts are usually well available through specialist dealers.
Sources: SpecCodex register, model data: Indespension (weitere Modelle), Indespension (manufacturer)
Technical data
Dimensions and weights
| Length | 4,200 mmcorrect |
|---|---|
| Width | 2,180 mmcorrect |
| Unladen weight | 890 kgcorrect |
| Gross vehicle weight | 2,100 kgcorrect |
Frequently asked questions
How much does the Indespension MONARQUE / 255+75 weigh?
The unladen weight is 890 kg.
What is the gross vehicle weight of the Indespension MONARQUE / 255+75?
2,100 kg.
What are the dimensions of the Indespension MONARQUE / 255+75?
4,200 mm × 2,180 mm.
When was the Indespension MONARQUE / 255+75 built?
Production years: 2000.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
