Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › CLAAS › Other models › 7040

CLAAS 7040 – specifications

Built: 2013–2014 · Series: Other models

Data for the version built 2013–2014 · Data origin: Official register · sources

More machines from model year 2013

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

CLAAS builds the 7040. According to the available register data, the recorded vehicles date from 2013 to 2014. Dimensions: 5,080 mm long and 2,500 mm wide. Empty, it weighs 8,250 kg. The permitted gross weight is 10,000 kg. The engine delivers 88 kW, has 4 cylinders, with a displacement of 4,038 cm³. According to the Finnish vehicle register, 4 examples of this model are on record. The EU type-approval number for this model is e1*2003/37*0320*02.

CLAAS – other tractors: collective page of the agricultural-machinery manufacturer from Harsewinkel, with its own tractor range since the 2003 Renault Agriculture acquisition, Iveco/FPT diesel engines, 50 to 129 kW

This page gathers the CLAAS tractors the register could not assign to a named range, including models from the Ares, Arion, Axion, Celtis, Nectis and Xerion ranges as well as older Renault types such as the 856 RZ and the Talos. CLAAS, based in Harsewinkel, was originally known above all for harvesting equipment and only gained its own tractor range in 2003 with the acquisition of Renault Agriculture; some of the models listed here therefore still carry the Renault type logic. The diesel engines come from Iveco, or more precisely its engine division FPT.

Read on 3 more paragraphs

The register lists here 50 versions with 50 to 129 kW from four- to six-cylinder engines with 3,621 to 6,788 cm³ displacement, exclusively with diesel drive. Unladen weights range from 4,400 to 10,000 kg, gross vehicle weights from 7,000 to 16,000 kg, lengths from 4,070 to 5,975 mm and widths from 2,140 to 2,600 mm.

By entering the tractor segment, CLAAS added to its range of combine harvesters, forage harvesters and balers the tractor needed for a complete farm operation, putting it in competition with Fendt, John Deere and Case IH. The wide weight span of this collective page, from mid-class to large tractors, shows how differently the models gathered here were used.

On used examples with Iveco/FPT diesel engines, the condition of the turbocharger and injection system matters, while on all models the clutch, gearbox and hydraulics for the lift linkage and implements, and rust on the cab and mudguards, need checking; on the larger types, the condition of the four-wheel drive and differential locks is an additional check point. Spare parts run through CLAAS distribution.

Sources: SpecCodex register, model data: CLAAS (weitere Traktoren), CLAAS (manufacturer)

Technical data

Engine

Power88 kWcorrect
Cylinders4correct
Displacement4,038 cm³correct

Dimensions and weights

Length5,080 mmcorrect
Width2,500 mmcorrect
Unladen weight8,250 kgcorrect
Gross vehicle weight10,000 kgcorrect

Where this model stands

Power-to-weight ratio: 10.7 kW/t (88 kW / 8.2 t)

Power class: Large (100–180 hp)

Stronger than 74% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the CLAAS 7040 have?

The CLAAS 7040 delivers 88 kW.

How much does the CLAAS 7040 weigh?

The unladen weight is 8,250 kg.

What is the gross vehicle weight of the CLAAS 7040?

10,000 kg.

What engine does the CLAAS 7040 have?

4 cylinders, 4,038 cm³ displacement.

What are the dimensions of the CLAAS 7040?

5,080 mm × 2,500 mm.

When was the CLAAS 7040 built?

Production years: 2013–2014.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.​⁠‍​⁠‍​‌‌‌⁠‍⁠⁠⁠‍‌​⁠‍

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.

Check and complete the data →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · Data sources and cross-checks

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare