Technical register for agricultural, construction and commercial machinery · sourced data
Start › Car trailers up to 3.5 t › Böckmann › PHA DUO GP

Böckmann PHA DUO GP

Built: 2005 · Series: Trailers up to 3.5 t (Class O2)

More machines from model year 2005

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Böckmann PHA DUO GP is a car trailer from Böckmann (EU vehicle class O2), registered as built in 2005. It is 4,500 mm long and 2,200 mm wide, weighs 800 kg unladen and has a permitted gross weight of 2,000 kg.

Subtracting the unladen weight from the permitted gross weight leaves the Böckmann PHA DUO GP with a payload of 1,200 kg. More than half of the gross weight is therefore available for cargo.

Under EU licensing rules, a category B licence allows a combination of towing vehicle and this trailer up to 3,500 kg permitted total mass – so the towing vehicle may weigh at most 1,500 kg. Code 96 on a B licence raises the limit to 4,250 kg (towing vehicle up to 2,250 kg); beyond that a BE licence is required. Being over 750 kg, the trailer must be braked, and the towing vehicle needs a braked towing capacity of at least 2,000 kg.

Among the 586 car trailers from Böckmann with a stated length, the Böckmann PHA DUO GP at 4,500 mm is in the middle of the range (rank 173); the range runs from 3,170 to 7,960 mm. The Finnish vehicle register lists one unit.

Böckmann car trailers up to 3.5 t (class O2) – from plain load trailers to the Big Master and Big Champion horse ranges: 588 versions, kerb weight 235 to 1,500 kg, gross weight up to 3,000 kg

Böckmann Fahrzeugwerke, based in Lastrup in the Cloppenburg district, trace back to a village smithy founded by Anton Böckmann in 1956; cattle-trailer production began in 1958, and from 1960 the first horse trailers were built from them. Over 70 years the firm has, by its own account, built more than a million trailers and is today among the largest German makers of car and horse trailers. This class O2 collective page gathers Böckmann trailers with a gross weight of 0.75 to 3.5 tonnes, from plain load trailers in the AB and ABL ranges through tandem-axle types such as ALT and ATA to the classic horse-trailer ranges Big Master and Big Champion; the digit string before the slash, such as 2513, by manufacturer logic denotes the platform dimensions in decimetres (2.50 by 1.30 m), and the number after it the weight class.

Read on 3 more paragraphs

The register lists 588 versions with kerb weights from 235 to 1,500 kg, gross weights from 1,000 to 3,000 kg and widths from 1,460 to 2,550 mm; lengths are recorded for 577 models and range from 3,170 to 7,960 mm.

With a gross-weight ceiling of 3 tonnes, this range covers the lighter segment of Böckmann trailers, from plain car trailers to the Big Master and Big Champion horse transporters designed for comfortable animal transport; in the market Böckmann competes chiefly with Humbaur and Westfalia.

When buying used, check the condition and smooth action of the coupling head, whether the overrun brake and its linkage work, the axles and rubber-torsion suspension, frame corrosion at the drawbar and axle mounts, the lighting system, the floor, tarpaulin or partitions, and tyre age; Böckmann maintains a dense German dealer and parts network.

Sources: SpecCodex register, model data: Böckmann Anhänger, Böckmann Fahrzeugwerke (manufacturer)

Technical data

Dimensions and weights

Length4,500 mmcorrect
Width2,200 mmcorrect
Unladen weight800 kgcorrect
Gross vehicle weight2,000 kgcorrect

Frequently asked questions

How much does the Böckmann PHA DUO GP weigh?

The unladen weight is 800 kg.

What is the gross vehicle weight of the Böckmann PHA DUO GP?

2,000 kg.

What are the dimensions of the Böckmann PHA DUO GP?

4,500 mm × 2,200 mm.

When was the Böckmann PHA DUO GP built?

Production years: 2005.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare