Barthau GVP2
Built: 2005 · Series: Other models
More machines from model year 2005
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Dimensions and weights
| Length | 4,650 mmcorrect |
|---|---|
| Width | 2,200 mmcorrect |
| Unladen weight | 860 kgcorrect |
| Gross vehicle weight | 2,700 kgcorrect |
Frequently asked questions
How much does the Barthau GVP2 weigh?
The unladen weight is 860 kg.
What is the gross vehicle weight of the Barthau GVP2?
2,700 kg.
What are the dimensions of the Barthau GVP2?
4,650 mm × 2,200 mm.
When was the Barthau GVP2 built?
Production years: 2005.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
AG 2508
AG 3500
ANHAENGERBAU
Barthau PK 2
ET 1351
ET/EH 1501
G656
MZ
MZ 2002
P 2000
PD,VS,PV
PKL2702
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.