Atec 2000
Built: 2002 · Series: Other models
More machines from model year 2002
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Atec – further models: collective page for horse trailers outside the named ranges, Starline, Olympialine, Centaurus, Diamond and Regency lines, unladen weight 470 to 1,260 kg, gross weight up to 3,250 kg
This page gathers trailers from the Dutch brand Atec that the register could not assign to a named range. Several model names explicitly carry the word Paardentrailer, Dutch for horse trailer, alongside the trim lines Starline, Olympialine, Centaurus, Diamond, Elite and Regency; suffixes such as XL and VAR and the letters C2, H, T1, U and W accompany different body and axle variants within the same line.
Read on 3 more paragraphs
The register lists here 104 versions with unladen weights from 470 to 1,260 kg, gross weights from 1,200 to 3,250 kg, lengths from 2,830 to 5,990 mm and widths from 1,800 to 2,530 mm.
With this spread, Atec covers practically the whole of class O2, from small single-horse trailers to large multi-horse transporters with a gross weight over three tonnes. As a Dutch horse trailer maker, Atec competes in the European equestrian market with brands such as Böckmann and Humbaur, with the Starline and Olympialine lines marking different price and comfort levels.
Buying a used horse trailer, the floor construction comes first: the rubber or wooden floor must be checked for rot and wear-through, along with the condition of the partitions, headroom and padding. Next check the axle and brake, the condition of the ramp and ramp springs, rust around the wheel arches and floor, and the seal of the roof and windows; on the larger multi-horse versions also check ventilation and the condition of the partition bars.
Sources: Kennwerte der Modelle Atec (weitere Modelle), RDW (Niederlande)
Technical data
Dimensions and weights
| Length | 4,310 mmcorrect |
|---|---|
| Width | 2,100 mmcorrect |
| Unladen weight | 740 kgcorrect |
Frequently asked questions
How much does the Atec 2000 weigh?
The unladen weight is 740 kg.
What are the dimensions of the Atec 2000?
4,310 mm × 2,100 mm.
When was the Atec 2000 built?
Production years: 2002.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 4 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
4000 x 2000
ATEC C2-20
ATEC STARLINE C2/T1/270+76
Atev C2-20
C2 2000/2550
C2 Olympialine
C2 Olympialine XL
C2 P042/260+76
C2 Starline
C2 Starline XL
C2 VAR H Olympialine
C2 VAR H Starline Diamond
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.