Woma MK3 250M P18
Built: 2011 · Series: Other models
More machines from model year 2011
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
WOMA – other models: the collective page of pressure-washer trailers outside the named ranges from the Duisburg maker, with the Ecomaster and Ecotherm ranges, 1.3 to 3.2 t unladen weight at 1.8 to 3.5 t gross weight
This page gathers the WOMA trailers the register could not assign to a named range. WOMA of Duisburg makes high-pressure water technology, and its cleaning units are mounted on trailer chassis so they can be used mobile on building sites, in industrial plants or for pipe cleaning. The Ecomaster range denotes cold-water high-pressure cleaners, Ecotherm the hot-water versions; the additional designations such as D 190Z, D 250Z or MK3 250M mark the respective specification level of the unit.
Read on 3 more paragraphs
The register lists here 11 versions with unladen weights from 1,320 to 3,160 kg, gross weights from 1,800 to 3,500 kg, lengths from 4,350 to 4,460 mm and widths from 1,850 to 2,090 mm.
With unladen weights often close to the gross weight, these trailers show that much of the payload is already taken up by the permanently fitted high-pressure unit; such units are used in sewer construction, the building industry and cleaning services. The maker also offers versions adapted for low-temperature operation and for cleaning sewer networks at greater depths.
On a used purchase, what matters on these equipment trailers is the condition of the pump and high-pressure hoses, the tightness of connections and nozzles, the condition of the engine or drive, chassis, axle and brakes, and the control electrics; spare parts run through WOMA.
Sources: Kennwerte der Modelle Woma (weitere Modelle), WOMA Apparatebau (Hersteller)
Technical data
Dimensions and weights
| Width | 1,980 mmcorrect |
|---|---|
| Wheelbase | 3,150 mmcorrect |
| Unladen weight | 2,200 kgcorrect |
| Gross vehicle weight | 2,700 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Woma MK3 250M P18 weigh?
The unladen weight is 2,200 kg.
What is the gross vehicle weight of the Woma MK3 250M P18?
2,700 kg.
Up to what speed is the Woma MK3 250M P18 approved?
Approved up to 100 km/h.
When was the Woma MK3 250M P18 built?
Production years: 2011.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
ECO PRO 2500
ECOMASTER
ECOMASTER D 190Z
ECOMASTER D 250Z
ECOMASTER MK3
ECOMASTER MK3 250M
ECOMASTER MK3 2800/26
ECOTHERM 600
ECOTHERM 800
HDS17/60
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.