Vermeer BC 620 I
Built: 1991–1992 · Series: Other models
More machines from model year 1991
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Vermeer – other models: the collective page of chippers and drilling rigs on trailer chassis outside the named ranges, BC and HG range, gross weight up to 33 tonnes
This page bundles the Vermeer trailers outside the named ranges – chippers and drilling rigs on their own trailer chassis from the US manufacturer based in Pella, Iowa. The BC range (Brush Chipper) runs from compact green-waste chippers to the XL version, while the HG range (Horizontal Grinder) denotes large grinding units for wood and green waste; the added letters I, A and T mark the engine and drive type, and G2 indicates an updated design generation.
Read on 3 more paragraphs
The register lists here 52 versions with unladen weights from 740 to 33,000 kg, gross weights from 800 to 33,000 kg, lengths from 3,210 to 11,840 mm and widths from 1,240 to 2,550 mm.
With gross weights from under one to 33 tonnes, the page covers the whole Vermeer line-up, from the small chipper towable by car to the large grinding unit for composting and wood processing; Vermeer, alongside Bandit and Doppstadt, is one of the leading brands worldwide in this segment, sold through a worldwide dealer network.
On a used machine, check the condition of the blades or hammers and their mountings, wear on the infeed rollers and drum, the operating hours and condition of the engine and hydraulic pump, the operation of the safety cut-out at the infeed chute, and the condition of the chassis axle, brakes and tyres; on the large HG units, also check the tracked undercarriage or tow drawbar and the remote control. Parts run through the Vermeer dealer network.
Sources: Kennwerte der Modelle Vermeer (weitere Modelle), Vermeer Corporation (Hersteller)
Technical data
Dimensions and weights
| Width | 1,340 mmcorrect |
|---|---|
| Unladen weight | 780 kgcorrect |
| Gross vehicle weight | 800 kgcorrect |
Drivetrain and chassis
| Wheels | 2correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Vermeer BC 620 I weigh?
The unladen weight is 780 kg.
What is the gross vehicle weight of the Vermeer BC 620 I?
800 kg.
Up to what speed is the Vermeer BC 620 I approved?
Approved up to 100 km/h.
When was the Vermeer BC 620 I built?
Production years: 1991–1992.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.