Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Verdonk › VA 2000

Verdonk VA 2000

Built: 1991–1995 · Series: Other models

More machines from model year 1991

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

Verdonk builds the VA 2000. According to the available register data, the recorded vehicles date from 1991 to 1995. Dimensions: 2,130 mm wide. Its kerb weight comes to 750 kg. Fully loaded, it may not exceed 2,000 kg. Axle to axle, the wheelbase is 720 mm. It reaches up to 100 km/h. According to the Dutch vehicle register, 2 examples of this model are on record.

Verdonk – further models: Dutch collector page of light and medium multi-purpose trailers outside the VA series, 240 to 4,860 kg kerb weight, up to 7 t gross vehicle weight

Verdonk is a Dutch manufacturer of multi-purpose trailers; this page gathers models outside the named series. Most type designations begin with the VA prefix, such as VA 1000, VA 1300, VA 2000, VA 2500 and VA 3000, supplemented with suffixes such as EA, TA, SW or PL for different bodies; the register also lists individual models such as the SCHAFTWAGEN.

Read on 3 more paragraphs

The register lists 131 versions with kerb weights from 240 to 4,860 kg and a gross vehicle weight from 900 to 7,000 kg. Widths range from 1.40 to 2.54 m; lengths are recorded for only 23 of the 131 models, there spanning 3.23 to 11.84 m.

Trailers in this range serve general trade and agricultural transport across the Netherlands, from small car trailers to medium tandem-axle trailers for livestock, machinery or crops. Single-axle versions with overrun brakes make up the lighter half of the programme, while tandem-axle versions with their own brake system cover the heavier models up to 7 tonnes; Verdonk operates here alongside numerous other Dutch small-series manufacturers.

When buying used, check the frame and load platform (corrosion at welds), axles, wheel bearings and brake linings, the overrun coupling and its handbrake cable, lighting, and the coupling and jockey wheel; on livestock versions, also check the floor and vent slats for rust-through. Running-gear and coupling spares are widely stocked by Dutch trailer dealers.

Sources: Kennwerte der Modelle Verdonk (weitere Modelle), RDW (Niederlande)

Technical data

Dimensions and weights

Width2,130 mmcorrect
Wheelbase720 mmcorrect
Unladen weight750 kgcorrect
Gross vehicle weight2,000 kgcorrect

Drivetrain and chassis

Top speed100 km/hcorrect

Frequently asked questions

How much does the Verdonk VA 2000 weigh?

The unladen weight is 750 kg.

What is the gross vehicle weight of the Verdonk VA 2000?

2,000 kg.

Up to what speed is the Verdonk VA 2000 approved?

Approved up to 100 km/h.

When was the Verdonk VA 2000 built?

Production years: 1991–1995.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare