Verdonk 1302A
Built: 1998 · Series: Other models
More machines from model year 1998
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Verdonk – further models: Dutch collector page of light and medium multi-purpose trailers outside the VA series, 240 to 4,860 kg kerb weight, up to 7 t gross vehicle weight
Verdonk is a Dutch manufacturer of multi-purpose trailers; this page gathers models outside the named series. Most type designations begin with the VA prefix, such as VA 1000, VA 1300, VA 2000, VA 2500 and VA 3000, supplemented with suffixes such as EA, TA, SW or PL for different bodies; the register also lists individual models such as the SCHAFTWAGEN.
Read on 3 more paragraphs
The register lists 131 versions with kerb weights from 240 to 4,860 kg and a gross vehicle weight from 900 to 7,000 kg. Widths range from 1.40 to 2.54 m; lengths are recorded for only 23 of the 131 models, there spanning 3.23 to 11.84 m.
Trailers in this range serve general trade and agricultural transport across the Netherlands, from small car trailers to medium tandem-axle trailers for livestock, machinery or crops. Single-axle versions with overrun brakes make up the lighter half of the programme, while tandem-axle versions with their own brake system cover the heavier models up to 7 tonnes; Verdonk operates here alongside numerous other Dutch small-series manufacturers.
When buying used, check the frame and load platform (corrosion at welds), axles, wheel bearings and brake linings, the overrun coupling and its handbrake cable, lighting, and the coupling and jockey wheel; on livestock versions, also check the floor and vent slats for rust-through. Running-gear and coupling spares are widely stocked by Dutch trailer dealers.
Sources: Kennwerte der Modelle Verdonk (weitere Modelle), RDW (Niederlande)
Technical data
Dimensions and weights
| Length | 5,400 mmcorrect |
|---|---|
| Width | 1,970 mmcorrect |
| Wheelbase | 3,120 mmcorrect |
| Unladen weight | 1,000 kgcorrect |
| Gross vehicle weight | 1,300 kgcorrect |
Drivetrain and chassis
| Wheels | 2correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Verdonk 1302A weigh?
The unladen weight is 1,000 kg.
What is the gross vehicle weight of the Verdonk 1302A?
1,300 kg.
Up to what speed is the Verdonk 1302A approved?
Approved up to 100 km/h.
What are the dimensions of the Verdonk 1302A?
5,400 mm × 1,970 mm.
When was the Verdonk 1302A built?
Production years: 1998.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.