Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Tte › 2000

Tte 2000

Built: 2002 · Series: Other models

More machines from model year 2002

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

Tte builds the 2000. According to the available register data, the vehicle dates from 2002. Dimensions: 1,920 mm wide. Empty, it weighs 1,740 kg. The permitted gross weight is 2,200 kg. Axle to axle, the wheelbase is 700 mm. It reaches up to 100 km/h. According to the Dutch vehicle register, 2 examples of this model are on record.

Tte F10001 - trailer of EU class O4: 20,000 kg gross weight, 5,336 kg unladen weight, built 1976 to 1977, 2 wheels, width 2,500 mm.

With a gross weight of 20,000 kg, the F10001 from Tte belongs to the EU trailer class O4 (above 10,000 kg gross weight), the heavy trailers and semi-trailers towed behind tractor units or heavy trucks in long-haul and heavy-transport work. This model was built from 1976 to 1977. Trailers in this class need a compressed-air brake system.

Read on 3 more paragraphs

With an unladen weight of 5,336 kg, that leaves a payload of 14,664 kg. The width is 2,500 mm. The trailer runs on 2 wheels.

Fifth-wheel or drawbar load and the design of the coupling decide which tractor unit suits a trailer like this. At this weight class the trailer is built for long-haul or heavy and abnormal-load work, not for occasional private use.

On a viewing, the brake cylinders, lines and the air system's tightness are among the first points to check. With several axles, a test drive is a good chance to compare braking effect between axles. The suspension and any dampers should be checked for leaks and correct ride height. On the frame and at the drawbar mounting points it is worth checking for rust and old weld repairs. Wheel bearings and steering knuckles should be checked for play and uneven running noise. The coupling head or kingpin shows heavy wear where the trailer has seen intensive use. Lighting, wiring harness and plug connectors are common weak points on older trailers.

Sources: Kennwerte des Modells Tte F10001

Technical data

Dimensions and weights

Width1,920 mmcorrect
Wheelbase700 mmcorrect
Unladen weight1,740 kgcorrect
Gross vehicle weight2,200 kgcorrect

Drivetrain and chassis

Top speed100 km/hcorrect

Frequently asked questions

How much does the Tte 2000 weigh?

The unladen weight is 1,740 kg.

What is the gross vehicle weight of the Tte 2000?

2,200 kg.

Up to what speed is the Tte 2000 approved?

Approved up to 100 km/h.

When was the Tte 2000 built?

Production years: 2002.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare