Thaler TTA 509
Built: 2018–2024 · Series: Other models
More machines from model year 2018
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Thaler – other models: the collective page of forwarding trailers and cable winches outside the named ranges, KE-SP type series, gross vehicle weight from 1.35 to 5 t, forestry and agricultural technology
This page gathers the Thaler trailers the register could not assign to a named range. One model carries the German term 'Doppelspillkopfwinde' directly in its name, a cable winch with two capstan heads for skidding round timber; the KE-SP type series follows with numbers for pulling force, such as KE-SP2030 and KE-SP6070, some with the RSW suffix; alongside these stand the RVL and TTA ranges.
Read on 3 more paragraphs
The register lists 16 versions here with kerb weights from 340 to 5,000 kg, gross vehicle weights from 1,350 to 5,000 kg, lengths from 3,000 to 4,710 mm and widths from 1,580 to 2,550 mm.
With cable winches in the model name and comparatively short lengths, the models on this collective page belong to forestry and agricultural technology: forwarding trailers and trailers with a cable winch, as used for pulling and loading round timber on forestry and farming operations. Besides forestry work, the lighter trailers also serve on the farmyard for timber and material haulage.
Buying used, the winch models call for a check of the cable and capstan head for wear, the drive hydraulics and their tightness; on every trailer check the frame and drawbar for deformation, the axle and brakes, and the load floor for damage from round timber. Spare parts for winches run through the forestry-equipment trade. On the TTA models without a winch, the check follows that of ordinary agricultural and forestry trailers.
Technical data
Dimensions and weights
| Length | 3,000 mmcorrect |
|---|---|
| Width | 2,010 mmcorrect |
| Wheelbase | 2,400 mmcorrect |
| Unladen weight | 340 kgcorrect |
| Gross vehicle weight | 1,350 kgcorrect |
Drivetrain and chassis
| Wheels | 2correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Thaler TTA 509 weigh?
The unladen weight is 340 kg.
What is the gross vehicle weight of the Thaler TTA 509?
1,350 kg.
Up to what speed is the Thaler TTA 509 approved?
Approved up to 100 km/h.
What are the dimensions of the Thaler TTA 509?
3,000 mm × 2,010 mm.
When was the Thaler TTA 509 built?
Production years: 2018–2024.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
DOPPELSPILLKOPFWINDE
KE SP 3050
KE SP 3050 E
KE SP3030 RSW
KE-SP 2030
KE-SP 4050
KE-SP 4050 RSW
KE-SP 6070 RSW
KE-SP2030
KE-SP3050RSW
KE-SP4050
RVL 2021
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.