Technical register for agricultural, construction and commercial machinery · sourced data
StartTrucks over 7.5 tSteyr › 12 M18

Steyr 12 M18

Built: 1987 · Series: Other models

More machines from model year 1987

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

Steyr builds the 12 M18. According to the available register data, the vehicle dates from 1987. Dimensions: 6,050 mm long and 2,500 mm wide. Its kerb weight comes to 6,608 kg. Fully loaded, it may not exceed 11,500 kg. The engine has 6 cylinders, with a displacement of 6,596 cm³. Axle to axle, the wheelbase is 3,490 mm. It rolls on 4 wheels. According to the Dutch vehicle register, one example of this model is on record.

Steyr – other truck models: the second collective page of series outside the named types, from light 4x2 to heavy 8x4 and 6x6 chassis, 110 to 191 kW, 5.3 to 12.0 litres displacement

This page gathers Steyr trucks the register could not assign to a named series – from the light two-axle chassis to the heavy three-axle tipper and all-wheel-drive vehicle. Steyr, the commercial-vehicle plant of Steyr-Daimler-Puch in the Upper Austrian town of Steyr, built trucks from the 1920s and was known above all for off-road, all-wheel-drive vehicles with the 4x4, 6x6 and 8x4 drive formulas for construction, forestry and the military; the truck division was absorbed into the MAN group in the 1990s. The type designations in the register follow a number-and-letter scheme: a power or weight class before the slash, a letter code for chassis and cab after it, and the drive formula at the end – for example 19S24/K38/4X4 or 27S42/P50/6X2 – supplemented by special versions such as the Steyr 680 and the 1291 series for heavy transport.

Read on 3 more paragraphs

The register lists here 60 versions with four- to eight-cylinder engines, displacements of 5,320 to 11,964 cm³, unladen weights of 4,040 to 16,870 kg, gross weights of 4,870 to 35,000 kg, lengths of 4,710 to 9,870 mm and widths of 2,200 to 2,570 mm; a few outputs of 110 to 191 kW are also recorded.

Steyr trucks shaped Austrian and Alpine construction-site traffic and the armed forces of several countries for decades, where the all-wheel-drive models were valued for their climbing ability and ruggedness; individual type designations in this set recognisably come from Finnish vehicle registers.

On used examples, on the all-wheel-drive chassis the condition of the transfer case and axles, rust on the frame and load beds, on the tippers the hydraulic cylinders and side boards, and on older model years the availability of spare parts through specialist Steyr and MAN dealers all count.

Sources: Kennwerte der Modelle Steyr (weitere Modelle), Traficom (Finnland)

Technical data

Engine

Cylinders6correct
Displacement6,596 cm³correct

Dimensions and weights

Length6,050 mmcorrect
Width2,500 mmcorrect
Wheelbase3,490 mmcorrect
Unladen weight6,608 kgcorrect
Gross vehicle weight11,500 kgcorrect

Drivetrain and chassis

Wheels4correct

Frequently asked questions

How much does the Steyr 12 M18 weigh?

The unladen weight is 6,608 kg.

What is the gross vehicle weight of the Steyr 12 M18?

11,500 kg.

What engine does the Steyr 12 M18 have?

6 cylinders, 6,596 cm³ displacement.

What are the dimensions of the Steyr 12 M18?

6,050 mm × 2,500 mm.

When was the Steyr 12 M18 built?

Production years: 1987.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare