Stahl TP270 – specifications
Built: 1992 · Series: Other models
Data for the version built 1992 · Data origin: Official register · sources
More machines from model year 1992
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Stahl – other models: the collective page of trailers outside the named ranges, from SA 4000L to VVW5500, 870 kg to 4.5 t unladen weight, 2 to 6.4 t gross weight
This page gathers the trailers of the Stahl brand that the register could not assign to a named range. The model names SA 4000L, TP 270 and VVW5500 show different range codes within a small programme that is broadly spread in size. Trailers of this size are supplied, depending on the model, with one or two axles.
Read on 3 more paragraphs
The register lists here 4 versions with unladen weights from 870 to 4,530 kg and gross weights from 2,000 to 6,350 kg. Lengths from 4,050 to 10,500 mm and widths from 2,300 to 2,320 mm are recorded.
The programme reaches from light trailers in the car-trailer class to models with a gross weight of more than 6 t and so covers both private and commercial haulage tasks; the wide span of lengths from just over 4 to more than 10 m reflects different bodies, from a simple platform to a long special-purpose trailer. In private use, transporting garden waste, building materials or boats tends to dominate, while in commercial use it is small-scale haulage.
Buying used, check for rust on the frame and drawbar, the condition of axles, brakes and the overrun brake device, the condition of the platform or side panels, and tyres and lighting. Parts for axles, brakes and couplings run through the general trailer parts trade. A service book and inspection history give additional insight into maintenance condition and accident-free use.
Sources: SpecCodex register, model data: Stahl (weitere Modelle)
Technical data
Dimensions and weights
| Length | 4,050 mmcorrect |
|---|---|
| Width | 2,300 mmcorrect |
| Coupling-to-axle distance | 730 mmcorrect |
| Unladen weight | 870 kgcorrect |
| Gross vehicle weight | 2,000 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Stahl TP270 weigh?
The unladen weight is 870 kg.
What is the gross vehicle weight of the Stahl TP270?
2,000 kg.
Up to what speed is the Stahl TP270 approved?
Approved up to 100 km/h.
What are the dimensions of the Stahl TP270?
4,050 mm × 2,300 mm.
When was the Stahl TP270 built?
Production years: 1992.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
