Sigg 10 S
Built: 1994 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Dimensions and weights
| Width | 1,870 mmcorrect |
|---|---|
| Unladen weight | 290 kgcorrect |
| Gross vehicle weight | 1,100 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Sigg 10 S weigh?
The unladen weight is 290 kg.
What is the gross vehicle weight of the Sigg 10 S?
1,100 kg.
Up to what speed is the Sigg 10 S approved?
Approved up to 100 km/h.
When was the Sigg 10 S built?
Production years: 1994.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
16 PK 45-T6
18K28-E16N-S
20PL33-T19N
26PL31-T19
27K28-T1N
27PL38-T1N
30K33-T1
35AT51-T5N
35BM40-T8
35K33-T1
35K38-T4N
35PL36-T3
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.