Sean Nugent Engineering G2512-1
Built: 2024 · Series: Other models
More machines from model year 2024
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Sean Nugent Engineering – other models: the collective page for trailers outside the named series, series codes B, F, G, HB, LS, P and T, gross weight from 1,400 to 3,500 kg
This page gathers Sean Nugent Engineering trailers that the register could not assign to a named series. The models carry short codes such as B4320, F3720H, G3015-2, HB25, LS106, P4318H or T3718H, where the letter marks the series and the following digits the size within that series.
Read on 3 more paragraphs
The register lists 41 versions with unladen weights from 565 to 1,380 kg and gross weights from 1,400 to 3,500 kg. Lengths run from 3,790 to 6,890 mm, widths from 1,690 to 2,450 mm.
Seven parallel series cover a wide field of single- and tandem-axle trailers with payloads up to just over three tonnes, from compact versions to longer platform and tipping variants, matching different frame lengths to different jobs on the farm, building site or yard. Such a range built from many parallel, small-dimensioned series is typical of trailer builders serving agriculture, construction and trade with adapted variants of the same base design.
On every series, check the frame and welds, the condition of axles and suspension, and the function of the overrun brake and the sides or tipping mechanism. On the larger versions with higher gross weight, also check tyres, brake linings and the lighting system. Parts for axles and brakes are available through the general trailer parts trade, body-specific parts are best sourced directly from the builder.
Sources: Kennwerte der Modelle Sean Nugent Engineering (weitere Modelle)
Technical data
Dimensions and weights
| Length | 3,820 mmcorrect |
|---|---|
| Width | 1,690 mmcorrect |
| Wheelbase | 2,590 mmcorrect |
| Unladen weight | 590 kgcorrect |
| Gross vehicle weight | 1,400 kgcorrect |
Drivetrain and chassis
| Wheels | 2correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Sean Nugent Engineering G2512-1 weigh?
The unladen weight is 590 kg.
What is the gross vehicle weight of the Sean Nugent Engineering G2512-1?
1,400 kg.
Up to what speed is the Sean Nugent Engineering G2512-1 approved?
Approved up to 100 km/h.
What are the dimensions of the Sean Nugent Engineering G2512-1?
3,820 mm × 1,690 mm.
When was the Sean Nugent Engineering G2512-1 built?
Production years: 2024.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.