SCHNEIDER A 2000 – specifications
Built: 1992 · Series: Other models
Data for the version built 1992 · Data origin: Official register · sources
More machines from model year 1992
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Schneider – other models: the collective page of trailers outside the named ranges, the 800, A 1550 and A 2000 types, 370 to 650 kg unladen weight, 1,600 to 2,700 kg gross weight
This page gathers the Schneider trailers the register could not assign to a named range. The listed types 800, A 1550 and A 2000 carry short alphanumeric designations from which no reliable pattern can be read. As with many smaller trailer brands, the programme is drawn from registration data, in which each model is listed individually with its technical values.
Read on 3 more paragraphs
The register lists here 3 versions with unladen weights from 370 to 650 kg, gross weights from 1,600 to 2,700 kg and widths from 2,120 to 2,500 mm.
With gross weights between 1.6 and 2.7 tonnes, all versions fall into the braked trailer class towed behind vans and stronger cars; widths over 2 metres point to side-walled or closed box bodies rather than narrow single-axle loads. For registration behind a car, besides the trailer's gross weight the tow vehicle's rated towing capacity is also decisive, since it sets the real limit for the load towed.
On a used example, axle and wheel-bearing condition, the function of the overrun brake and its linkage, rust on frame, drawbar and side walls, the state of lighting and plug, and tyres and rims all count. Parts for such small brands usually run through independent trailer workshops rather than a maker's own network. On versions with an overrun brake, the adjustment of the brake linkage and the condition of the brake linings are also worth checking before the first drive.
Sources: SpecCodex register, model data: Schneider (weitere Modelle)
Technical data
Dimensions and weights
| Width | 2,130 mmcorrect |
|---|---|
| Coupling-to-axle distance | 700 mmcorrect |
| Unladen weight | 470 kgcorrect |
| Gross vehicle weight | 2,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the SCHNEIDER A 2000 weigh?
The unladen weight is 470 kg.
What is the gross vehicle weight of the SCHNEIDER A 2000?
2,000 kg.
Up to what speed is the SCHNEIDER A 2000 approved?
Approved up to 100 km/h.
When was the SCHNEIDER A 2000 built?
Production years: 1992.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
