Scanvogn 730, KONTORVOGN
Built: 2017 · Series: Other models
More machines from model year 2017
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Scanvogn – other models: the collective page of Danish site wagons outside the named ranges, from the Kontorvogn and Toiletvogn to the Beboelsesvogn and Handicapvogn, 0.8 to 2.9 t unladen weight
This page gathers the Scanvogn site wagons the register could not assign to a named range – Danish site facilities on wheels for office, sanitary and living use. Kontorvogn denotes the office wagon, Toiletvogn and Bad/Toilet Vogn the sanitary version, Beboelsesvogn the living and welfare wagon, and Handicapvogn an accessible version.
Read on 3 more paragraphs
The register lists here 32 versions with unladen weights from 793 to 2,900 kg, gross weights from 900 to 3,500 kg, lengths from 4,960 to 9,210 mm and widths from 2,280 to 2,550 mm.
Such site wagons are used on Scandinavian building sites, road projects and temporary facilities such as site entrances or events, where they provide office, welfare room, sanitary facilities or accessible access without having to erect permanent buildings. The modular design allows several wagons to be combined into a larger welfare complex, typical for large building sites and multi-day events.
On site wagons, the condition of the floor and walls for damp, the tightness of roof and windows, the function of heating and electrics, and on sanitary versions also the water and waste-water fittings and frost protection of the pipework count; axles, brakes and drawbar need checking as on any trailer. Parts for the running gear run through the open trailer parts trade, for the interior fittings through the manufacturer.
Technical data
Dimensions and weights
| Length | 8,980 mmcorrect |
|---|---|
| Width | 2,510 mmcorrect |
| Wheelbase | 5,550 mmcorrect |
| Unladen weight | 1,565 kgcorrect |
| Gross vehicle weight | 2,000 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Scanvogn 730, KONTORVOGN weigh?
The unladen weight is 1,565 kg.
What is the gross vehicle weight of the Scanvogn 730, KONTORVOGN?
2,000 kg.
Up to what speed is the Scanvogn 730, KONTORVOGN approved?
Approved up to 100 km/h.
What are the dimensions of the Scanvogn 730, KONTORVOGN?
8,980 mm × 2,510 mm.
When was the Scanvogn 730, KONTORVOGN built?
Production years: 2017.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.