Technical register for agricultural, construction and commercial machinery · sourced data

Scania R650 V8 – specifications

Built: 2019 · Series: Trucks over 12 t (Class N3)

R650 V8 from Scania falls into the category Trucks over 12 t (Class N3). According to the available register data, the vehicle dates from 2019. The truck is 6,800 mm long and 2,550 mm wide. Its kerb weight comes to 9,935 kg. Fully loaded, it may not exceed 28,000 kg. The engine has 8 cylinders, with a displacement of 16,353 cm³. Axle to axle, the wheelbase is 4,430 mm. It runs on 10 wheels. The Dutch vehicle register lists one example of this model. Top speed is 90 km/h.

Data for the version built 2019 · Data origin: Official register · sources

More machines from model year 2019

Source: truck1.eu

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

Reading a Scania — what 93, 113, 124 and 142 tell you

Scania type designations are not arbitrary but a system: the leading digits give the displacement in litres, the last one the series. A 113 is therefore an eleven-litre from the 3-series, a 143 a fourteen-litre of the same generation, a 124 a twelve-litre from the 4-series. The 142, in turn, is a fourteen-litre of the older 2-series. Learn this once and every Scania plate becomes readable.

Read on 4 more paragraphs

The 3-series arrived in 1988 and was replaced by the 4-series in 1995. It covered a remarkable span: from 9 litres with 230 hp to the 14-litre V8 with 500 hp — the same series, from distribution work to heavy haulage. The 3-series was voted Truck of the Year in 1989, cited for ride comfort and economical, reliable engines.

With the 3-series Scania also introduced the Streamline name. Behind it lay more than cosmetics: a revised bumper, a redesigned grille with lower drag and an improved wind deflector on the driver's side. Inside came a curved dashboard, and the engines were reworked.

For the used market this means: two generation changes and some fifteen years of development lie between a 142 and a 124, even though both carry fourteen- and twelve-litre numbers. The number alone says nothing about age — the final digit does.

Many entries in this class come from official registration data. Dimensions, weights and axle counts are reliable; the exact engine variant of an individual vehicle is not always recorded.

Sources: Wikipedia: Scania Serie 3 (Wikipedia), (Wikipedia), eurotransport

Technical data

Engine

Cylinders8correct
Displacement16,353 cm³correct

Dimensions and weights

Length6,800 mmcorrect
Width2,550 mmcorrect
Wheelbase4,430 mmcorrect
Unladen weight9,935 kgcorrect
Gross vehicle weight28,000 kgcorrect

Drivetrain and chassis

Wheels10correct
Top speed90 km/hcorrect

Frequently asked questions

How much does the Scania R650 V8 weigh?

The unladen weight of the Scania R650 V8 is 9,935 kg.

What is the gross vehicle weight of the Scania R650 V8?

The gross vehicle weight of the Scania R650 V8 is 28,000 kg.

What engine does the Scania R650 V8 have?

The Scania R650 V8 has 8 cylinders and 16,353 cm³ displacement.

How fast does the Scania R650 V8 go?

The top speed of the Scania R650 V8 is 90 km/h.

What are the dimensions of the Scania R650 V8?

Dimensions of the Scania R650 V8: length 6,800 mm, width 2,550 mm.

When was the Scania R650 V8 built?

The Scania R650 V8 was built in 2019.

Used listings – figures from public listings

Between June and July 2026, speccodex recorded 3 public used-machine listings for Scania R650 V8 on one platform. Asking prices ranged from €92,000 to €99,000 (median €97,900), year of manufacture 2021.

Asking prices are sellers' demands, not achieved sale prices. Basis: public listings, recorded and analysed by speccodex. As of: 22 Nov 2026. Sellers usually do not state whether prices are net or gross.

How much does a used Scania R650 V8 cost? Asking prices from public listings

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.​⁠‌​‌‌‍‌‍​‌⁠​‌‍‌‌‍‍⁠

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.

Check and complete the data →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare