Rupprath CM 1302
Built: 2001–2004 · Series: Other models
More machines from model year 2001
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Rupprath – other models: the collective page of light trailers outside the named ranges, from the CM 1302 to the CM 3502 and the R 1400, R 2800 and RUPA, 310 to 610 kg unladen weight
This page gathers the Rupprath trailers the register could not assign to a named range. The CM 1302, CM 1802, CM 2002 and CM 3502 types, together with the R 1400, R 2800 and RUPA, form a range of light single-axle to light tandem trailers for moving small machinery, vehicles and goods in trade and private use. Depending on the version, the gap between unladen weight and gross weight gives a payload of around 740 kg to 3.2 tonnes.
Read on 3 more paragraphs
The register lists here 9 versions with unladen weights from 310 to 610 kg, gross weights from 1,350 to 3,500 kg, lengths from 5,950 to 7,000 mm and widths from 1,920 to 2,460 mm.
With payloads of up to around 3 tonnes against a 3.5-tonne gross weight, these trailers belong to the common class of tandem trailers for a category BE licence, widespread in trades, horticulture and landscaping and for moving vehicles and machinery. Such trailers are usually bought through the regional specialist trade or directly from the maker and often fitted with side-panel extensions or a tarpaulin for different loads.
On used trailers, the axles and wheel bearings, the braking system, the drawbar's overrun device, the frame and load floor for rust and wear, and the lighting and underrun guard for road approval count; parts run through the trailer trade.
Technical data
Dimensions and weights
| Width | 2,190 mmcorrect |
|---|---|
| Unladen weight | 330 kgcorrect |
| Gross vehicle weight | 1,450 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Rupprath CM 1302 weigh?
The unladen weight is 330 kg.
What is the gross vehicle weight of the Rupprath CM 1302?
1,450 kg.
Up to what speed is the Rupprath CM 1302 approved?
Approved up to 100 km/h.
When was the Rupprath CM 1302 built?
Production years: 2001–2004.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.