Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Respo › N/A

Respo N/A

Built: 2026 · Series: Other models

More machines from model year 2026

Respo builds this trailer. According to the available register data, the vehicle dates from 2026. Dimensions: 5,070 mm long and 2,010 mm wide. Its kerb weight comes to 458 kg. Fully loaded, it may not exceed 1,500 kg. Axle to axle, the wheelbase is 3,340 mm. It reaches up to 140 km/h. It runs on 2 wheels. According to the Dutch vehicle register, one example of this model is on record. The EU type-approval number for this model is e29*2018/858*00022*01.

Respo – other models: the collective page of boat and general-purpose trailers outside the named ranges, the HSS-R range with Long version, 1,000 to 3,500 kg gross weight, up to 10,660 mm length

This page gathers the Respo trailers the register could not assign to a named range – mostly boat and general-purpose trailers. The type designation begins with the gross weight in kilograms (1000 to 3500), followed by a letter-and-digit code for the body and track, and the Long suffix on the HSS-R range denotes versions with an extended wheelbase for larger boats. As category O2 trailers up to 3.5 t gross weight, the heavier versions require an overrun brake; boat and watersports trailers also typically carry a submersible, corrosion-protected lighting system.

Read on 3 more paragraphs

The register lists here 50 versions with unladen weights of 286 to 3,500 kg, gross weights of 1,000 to 3,500 kg, lengths of 4,965 to 10,660 mm and widths of 1,950 to 2,600 mm.

Boat trailers of this class serve the leisure and watersports market for sailing and motor boats up to the medium size range, with lengths of over ten metres for correspondingly large boats at a comparatively low unladen weight. The low share of unladen weight in the gross weight allows a comparatively high payload for engine, fuel tank and boat equipment on many versions.

On a used example, check the rollers and keel supports for wear, the condition of the submersible lights and wiring, corrosion on the axle and wheel bearings from salt and fresh water contact, and the function of the winch and bow support; the galvanising should be checked for damage.

Sources: Kennwerte der Modelle Respo (weitere Modelle)

Technical data

Dimensions and weights

Length5,070 mmcorrect
Width2,010 mmcorrect
Wheelbase3,340 mmcorrect
Unladen weight458 kgcorrect
Gross vehicle weight1,500 kgcorrect

Drivetrain and chassis

Wheels2correct
Top speed140 km/hcorrect

Frequently asked questions

How much does the Respo N/A weigh?

The unladen weight is 458 kg.

What is the gross vehicle weight of the Respo N/A?

1,500 kg.

Up to what speed is the Respo N/A approved?

Approved up to 140 km/h.

What are the dimensions of the Respo N/A?

5,070 mm × 2,010 mm.

When was the Respo N/A built?

Production years: 2026.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare