Putzmeister ESTRICH BOY 450BS
Built: 2020 · Series: Other models
More machines from model year 2020
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Putzmeister – other models: BSA-series trailer concrete pumps plus screed pumps and plastering machines, 765 to 23,850 kg kerb weight, up to 39 t gross vehicle weight
This page gathers Putzmeister trailers outside the named ranges. Putzmeister of Aichtal, part of the Chinese Sany group since 2012, builds trailer-mounted concrete pumps of the BSA range alongside truck-mounted concrete pumps, as well as screed pumps and plastering machines such as Mixokret and Estrich Boy. The BSA models are graded by pumping output or build size, as shown by the range from BSA 702 to BSA 1006.
Read on 3 more paragraphs
The register lists here 54 versions with kerb weights from 765 to 23,850 kg and gross vehicle weights from 850 to 39,000 kg, at widths from 1,300 to 2,550 mm; length ranges from 2,820 to 13,403 mm.
Trailer-mounted concrete pumps such as the BSA range complement self-propelled pumps on site where no mixer-truck chassis is needed, while the screed pumps and plastering machines serve finishing trades for screed and render work. Such trailer-mounted pumps are used on cramped inner-city sites and for smaller pours, where a truck-mounted pump would be uneconomical.
When buying used, check the pumping unit, wear parts such as the S-pipe and delivery cylinders, and the hydraulics, the condition of the boom on mast-equipped versions, the frame and axles for rust, and the brake system. On the concrete pumps also check the condition of the agitator and hopper and a current pressure test of the delivery line, on the plastering machines the condition of the mixing shaft and drive motor; spare and wear parts are supplied through Putzmeister's own factory service.
Sources: SpecCodex register, model data: Putzmeister, Putzmeister
Technical data
Dimensions and weights
| Length | 4,890 mmcorrect |
|---|---|
| Width | 1,540 mmcorrect |
| Wheelbase | 3,240 mmcorrect |
| Unladen weight | 1,950 kgcorrect |
| Gross vehicle weight | 2,000 kgcorrect |
Drivetrain and chassis
| Wheels | 2correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Putzmeister ESTRICH BOY 450BS weigh?
The unladen weight is 1,950 kg.
What is the gross vehicle weight of the Putzmeister ESTRICH BOY 450BS?
2,000 kg.
Up to what speed is the Putzmeister ESTRICH BOY 450BS approved?
Approved up to 100 km/h.
What are the dimensions of the Putzmeister ESTRICH BOY 450BS?
4,890 mm × 1,540 mm.
When was the Putzmeister ESTRICH BOY 450BS built?
Production years: 2020.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
