Polyma EXCA S2
Built: 2003 · Series: Other models
More machines from model year 2003
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Polyma SA0603005I65S: EU category O3 trailer rated at 9,000 kg gross weight, 4,300 mm wheelbase, 2,200 mm width and 8,630 kg unladen weight
With a gross weight rating of 9,000 kg, the Polyma SA0603005I65S sits in EU trailer category O3, the 3.5 to 10 tonne bracket in which trailers already carry compressed-air brakes rather than a simple overrun brake. The classification into this vehicle category follows the EU type-approval regulation (EU) 2018/858.
Read on 3 more paragraphs
A wheelbase of 4,300 mm spans two clearly separated axle groups, while a width of 2,200 mm stays narrow for this weight class. Against an unladen weight of 8,630 kg, the payload comes to only 370 kg, pointing to a heavy, self-supporting structure rather than generous extra capacity. That leaves roughly 4 per cent of the gross weight rating available as payload.
A trailer this narrow, this heavy and with such a long wheelbase suits loads with a low centre of gravity or working equipment rather than bulk cargo. Towing it calls for at least licence category C1E or CE on the driver's side, depending on the combination's gross weight. The tyres and wheels fitted must be rated for the approved top speed and the registered axle load. Registration also depends on a valid approval certificate matching exactly the values stated here.
Buying one used, it is worth checking the chassis for twist along its full length, the condition of the brake lines running between the widely spaced axles, play in the axle bearings, and corrosion at the points where the axles attach to the chassis. The narrow track also calls for a close look for uneven tyre wear. A complete inspection and service record makes judging the trailer's condition considerably easier.
Sources: SpecCodex-Register: Kennwerte des Modells Polyma SA0603005I65S
Technical data
Dimensions and weights
| Width | 2,480 mmcorrect |
|---|---|
| Unladen weight | 520 kgcorrect |
| Gross vehicle weight | 1,500 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Polyma EXCA S2 weigh?
The unladen weight is 520 kg.
What is the gross vehicle weight of the Polyma EXCA S2?
1,500 kg.
Up to what speed is the Polyma EXCA S2 approved?
Approved up to 100 km/h.
When was the Polyma EXCA S2 built?
Production years: 2003.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
