Peters BPSH 2700 – specifications
Built: 1991–1998 · Series: Other models
Data for the version built 1991–1998 · Data origin: Official register · sources
More machines from model year 1991
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Peters – other models: the collective page of a Dutch trailer builder with BP, PK and PP ranges, 380 to 4,410 kg unladen weight, up to 6,000 kg gross weight, widths up to 2.55 m
This page gathers the Peters trailers the register could not assign to a named range. Peters is a Dutch trailer maker whose model line-up consists mostly of short letter-number combinations such as BP, BPS, BPSH, PK and PP with an appended payload or weight class in kilograms (for instance BPSH 2000 or PK 3500). These codes point to different body forms and suspension variants of the respective range; which letter combination stands for which body or running-gear version cannot be reliably reconstructed from the model names in the register alone.
Read on 3 more paragraphs
The register lists here 79 versions with unladen weights from 380 to 4,410 kg and gross weights from 1,000 to 6,000 kg. Lengths range from 5,050 to 10,550 mm, widths from 1,290 to 2,550 mm.
With gross weights mostly within the EU trailer classes up to 3.5 and 6 t, Peters is one of the smaller, regionally active Dutch trailer builders whose vehicles are designed for trades, commerce and private use.
When buying a used Peters trailer, what counts is the condition of frame and welds, axles, brakes and the overrun coupling, the state of the lighting system and, depending on the body, the load bed and side boards; since the brand is little known outside the Netherlands, it is worth checking the chassis number against the registration papers before buying.
Sources: SpecCodex register, model data: Peters, Zulassungsdaten RDW (Niederlande)
Technical data
Dimensions and weights
| Width | 2,490 mmcorrect |
|---|---|
| Coupling-to-axle distance | 760 mmcorrect |
| Unladen weight | 980 kgcorrect |
| Gross vehicle weight | 2,700 kgcorrect |
Drivetrain and chassis
| Wheels | 2correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Peters BPSH 2700 weigh?
The unladen weight is 980 kg.
What is the gross vehicle weight of the Peters BPSH 2700?
2,700 kg.
Up to what speed is the Peters BPSH 2700 approved?
Approved up to 100 km/h.
When was the Peters BPSH 2700 built?
Production years: 1991–1998.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
