Technical register for agricultural, construction and commercial machinery · sourced data
StartTrailersPeki › GVA4000 / 8 / 3498

Peki GVA4000 / 8 / 3498

Built: 2007 · Series: Other models

More machines from model year 2007

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

GVA4000 / 8 / 3498 comes from the manufacturer Peki. According to the available register data, the vehicle dates from 2007. The trailer is 2,540 mm wide. Its kerb weight comes to 2,000 kg. The permitted gross weight is 2,300 kg. Top speed is 100 km/h. The Dutch vehicle register lists one example of this model.

Peki – other models: the collective page of transport and construction-site trailers outside the named ranges, types GKA and GVA, 1,300 to 18,500 kg gross weight, up to 13,800 mm length

This page gathers the Peki trailers the register could not assign to a named range. The GKA and GVA ranges combine a letter code with a weight and axle figure, such as GKA 35/17 or GVA 4000/8, followed by a serial number for the individual version. With gross weights up to 18.5 t, the versions range from category O3 into the lower part of category O4 and, depending on weight, require either an overrun brake or their own air braking system.

Read on 3 more paragraphs

The register lists here 83 versions with unladen weights of 1,050 to 7,090 kg, gross weights of 1,300 to 18,500 kg, lengths of 4,050 to 13,800 mm and widths of 1,950 to 2,550 mm.

The weight span up to 18.5 t points to a focus on commercial transport and construction-site trailers, with versions built for towing behind trucks and heavy tractor units. Such trailers carry construction machinery, bulk materials and building supplies on site and are usually towed by medium to heavy trucks.

On a used example, check the frame and welds, the condition of axles and braking system, wear on the load bed and sides, and the lighting system; parts availability for this brand is regionally limited. With frequent construction-site use, it is also worth checking the coupling and jockey wheel for wear.

Sources: Kennwerte der Modelle Peki (weitere Modelle)

Technical data

Dimensions and weights

Width2,540 mmcorrect
Unladen weight2,000 kgcorrect
Gross vehicle weight2,300 kgcorrect

Drivetrain and chassis

Top speed100 km/hcorrect

Frequently asked questions

How much does the Peki GVA4000 / 8 / 3498 weigh?

The unladen weight is 2,000 kg.

What is the gross vehicle weight of the Peki GVA4000 / 8 / 3498?

2,300 kg.

Up to what speed is the Peki GVA4000 / 8 / 3498 approved?

Approved up to 100 km/h.

When was the Peki GVA4000 / 8 / 3498 built?

Production years: 2007.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare