Orbons G O A 2.
Built: 1988 · Series: Trailers up to 3.5 t (Class O2)
More machines from model year 1988
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Orbons Anhänger bis 3,5 t (Class O2) – Dutch trailer builder with the G range, 250 kg to 3.5 t kerb weight, 1.0 to 2.55 m width
Class O2 covers trailers from 0.75 to 3.5 t gross vehicle weight. Orbons is a Dutch builder of such trailers with a range whose type codes mostly begin with "G" (such as G02, G05, G.O.2 or GO4); the following digits and letters distinguish the individual versions within the range from one another, with spellings that carry a leading dot and spellings without one occurring side by side.
Read on 4 more paragraphs
The register lists 86 versions with kerb weights from 250 to 3,500 kg, gross vehicle weights from 850 to 3,500 kg and widths from 1,000 to 2,550 mm;
With a span from small single-axle trailers to tandem-axle units at the upper end of class O2, Orbons serves the core segment of private and commercial light transport – from garden and building-material trailers to horse and equipment trailers.
Towing class O2 trailers requires only a category B licence in most countries, provided the combined train weight stays under the local limit; otherwise BE is needed. With two to six wheels, the G range covers single-axle trailers as well as tandem- and three-axle units; on single-axle trailers, correct nose weight on the ball coupling must be watched so as not to overload the towing vehicle.
Used, what counts is the condition of the drawbar and overrun brake, rust on the frame and side boards, axle bearing and tyre condition, the lighting system, and, on enclosed bodies, the sealing of roof and doors; parts supply runs mainly through the Dutch and German trailer specialist trade.
Sources: Kennwerte der Modelle Orbons Anhänger bis 3,5 t (Klasse O2)
Technical data
Dimensions and weights
| Width | 1,760 mmcorrect |
|---|---|
| Unladen weight | 370 kgcorrect |
| Gross vehicle weight | 1,200 kgcorrect |
Drivetrain and chassis
| Wheels | 2correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Orbons G O A 2. weigh?
The unladen weight is 370 kg.
What is the gross vehicle weight of the Orbons G O A 2.?
1,200 kg.
Up to what speed is the Orbons G O A 2. approved?
Approved up to 100 km/h.
When was the Orbons G O A 2. built?
Production years: 1988.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.