Muellers & Backhaus 624 MDX 35
Built: 2010 · Series: Other models
More machines from model year 2010
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Müller & Backhaus – other models: the collective page of trailers outside the named ranges, MDX type series from 421 to 630, unladen weight 1.05 to 2.4 t, gross weight up to 3.5 t
This page gathers the Müller & Backhaus trailers the register could not assign to a named range. Almost every model carries the suffix MDX after a three-digit number from 421 to 630, which orders the build size within the collective page; suffixes such as -35 or -50 mark further trim steps of the same base type. Some models appear under different spellings of the same base type, such as 624MDX, 624-50MDX and 624MDX-35.
Read on 3 more paragraphs
The register lists 17 versions here with unladen weights from 1,050 to 2,400 kg, gross weights from 1,050 to 3,500 kg, lengths from 3,180 to 4,650 mm and widths from 1,500 to 2,290 mm.
With gross weights up to 3.5 t, the Müller & Backhaus trailers sit in the class that can be towed on an ordinary car licence, as used in trades, small business and agriculture for transporting machinery, material and small equipment. Trailers like these are often found at smaller building and landscaping businesses as well as in private use for transporting small machinery and material.
When buying used in this class, what matters most is the condition of the drawbar eye and overrun brake assembly, corrosion on the frame and load bed, the condition of the sideboards and locking fittings, and the brake linings and wheel bearings. Spare parts for trailers of this size are usually stocked by the established trailer dealers and suppliers. The jockey wheel, sideboards and any towing-capacity marking should also be checked.
Sources: Kennwerte der Modelle Mueller & Backhaus (weitere Modelle)
Technical data
Dimensions and weights
| Width | 1,850 mmcorrect |
|---|---|
| Wheelbase | 2,100 mmcorrect |
| Unladen weight | 1,600 kgcorrect |
| Gross vehicle weight | 1,600 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Muellers & Backhaus 624 MDX 35 weigh?
The unladen weight is 1,600 kg.
What is the gross vehicle weight of the Muellers & Backhaus 624 MDX 35?
1,600 kg.
Up to what speed is the Muellers & Backhaus 624 MDX 35 approved?
Approved up to 100 km/h.
When was the Muellers & Backhaus 624 MDX 35 built?
Production years: 2010.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.