Meyer AZ 25 – specifications
Built: 2003 · Series: Other models
Data for the version built 2003 · Data origin: Official register · sources
More machines from model year 2003
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Meyer – other models: the collective page of trailers outside the named ranges, from the AZ 25 to the MSK 24-13, unladen weights from 570 to 10,160 kg, gross weights up to 35,000 kg
This page gathers the Meyer trailers the register could not assign to a named range: the AZ 25 and the versions MSK 10-9, MSK 20-13 and MSK 24-13. The type designations combine a letter code with a pair of numbers marking the weight or axle logic of the respective version. The span runs from light trailers in the low weight range to multi-axle versions with a high gross weight, typical of a range from a simple transport trailer to a heavy-duty trailer.
Read on 3 more paragraphs
The register lists here 4 versions with unladen weights from 570 to 10,160 kg, gross weights from 1,570 to 35,000 kg, lengths from 12,050 to 13,820 mm and widths from 2,070 to 2,600 mm.
Within this span sit both light trailers for occasional transport and heavy, multi-axle versions for commercial use in construction and haulage, where high payloads and a robust chassis matter. On the used market, such trailers often change hands several times before, after years in long-haul service, entering a second working life with smaller hauliers or in construction.
On a used trailer, the condition of chassis and axles, play and wear on the overrun brake or the brake system, cracks on the tow eye and drawbar, the condition of tyres and lighting, and a complete inspection and registration history count, as well as the underrun guard and access steps; spare parts for axles, brakes and lighting are usually easy to source through the general trailer-parts trade.
Sources: SpecCodex register, model data: Meyer (weitere Modelle)
Technical data
Dimensions and weights
| Width | 2,070 mmcorrect |
|---|---|
| Coupling-to-axle distance | 720 mmcorrect |
| Unladen weight | 570 kgcorrect |
| Gross vehicle weight | 1,570 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Meyer AZ 25 weigh?
The unladen weight is 570 kg.
What is the gross vehicle weight of the Meyer AZ 25?
1,570 kg.
Up to what speed is the Meyer AZ 25 approved?
Approved up to 100 km/h.
When was the Meyer AZ 25 built?
Production years: 2003.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.