Marathon 46-4
Built: 2002 · Series: Other models
More machines from model year 2002
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Marathon 30 RK LS FW: an EU class O3 trailer with a 5,572 kg gross weight, 9,500 mm long and 2,520 mm width, 6,650 mm wheelbase, model year 1995
With a gross weight of 5,572 kg, the Marathon 30 RK LS FW falls into EU trailer class O3, placing it among the medium-weight trailers with air brakes, for which a category BE or C1E licence is required. It dates from 1995.
Read on 3 more paragraphs
It is 9,500 mm long and 2,520 mm wide. With an unladen weight of 4,540 kg against the 5,572 kg gross weight, payload works out to 1,032 kg. The wheelbase is 6,650 mm.
This weight class requires an air or hydraulic brake system supplied from the towing vehicle. Trailers of this size carry construction machinery, vehicles or bulk material and sit on the border between local and long-distance haulage. In Germany it is subject to a roadworthiness inspection every year.
A used-trailer check should cover the brake system (pads or drums, and on air brakes also the lines, coupling heads and the ABS valve), the condition of the axles and suspension (bearing play, cracks in leaf springs or air bellows) and the frame, especially corrosion on cross members and welds. On top of that comes the load floor or body for wear and tightness, the lighting and electrical connector to the towing vehicle, and even tyre wear. The underride guard and the frame's longitudinal members should be free of rust-through, especially around the axle mounts. The tow ball coupling or drawbar eye and the drawbar itself belong in the check too, inspected for play and cracks at the attachment points. On multi-axle versions, also check that all axles sit level and inspect the steering knuckle pins and bearings.
Sources: SpecCodex-Register: Kennwerte des Modells 30 RK LS FW
Technical data
Dimensions and weights
| Length | 14,320 mmcorrect |
|---|---|
| Width | 2,480 mmcorrect |
| Wheelbase | 9,830 mmcorrect |
| Unladen weight | 6,900 kgcorrect |
| Gross vehicle weight | 9,095 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Marathon 46-4 weigh?
The unladen weight is 6,900 kg.
What is the gross vehicle weight of the Marathon 46-4?
9,095 kg.
Up to what speed is the Marathon 46-4 approved?
Approved up to 100 km/h.
What are the dimensions of the Marathon 46-4?
14,320 mm × 2,480 mm.
When was the Marathon 46-4 built?
Production years: 2002.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · How we check the data
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
