Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Laverda › Other models › AU 440 EU

Laverda AU 440 EU – specifications

Built: 1979 · Series: Other models

Data for the version built 1979 · Data origin: Official register · sources

More machines from model year 1979

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

AU 440 EU comes from the manufacturer Laverda. According to the available register data, the vehicle dates from 1979. The trailer is 2,150 mm wide. Its kerb weight comes to 770 kg. Fully loaded, it may not exceed 870 kg. Top speed is 100 km/h. It runs on 2 wheels. The Dutch vehicle register lists one example of this model.

Laverda – other models: the collective page for trailers outside the named series, the AS and AU ranges from AS 330 to AS 480, 695 to 882 kg unladen weight, up to 1,000 kg gross vehicle weight

This page brings together the Laverda trailers that the register could not assign to a named series. Model names form two related ranges, AS and AU, each with a three-digit number between 330 and 480 and a two-letter suffix such as CB, CS or EU, supplemented by the separately numbered B-425N model. No reliable meaning for the suffixes is given by the register.

Read on 3 more paragraphs

The register lists 7 versions here with unladen weights from 695 to 882 kg and gross vehicle weights from 795 to 1,000 kg, all trailers in class O2. Widths range from 2,100 to 2,190 mm.

With a narrow margin between unladen weight and gross vehicle weight, these trailers offer only a small payload reserve, pointing to a design geared towards the superstructure rather than high payload. The narrow weight spread across all seven versions points to a consistent design concept within the AS and AU model ranges. These trailers therefore suit tow vehicles with a modest towing capacity well.

When buying a used O2 trailer of this type, the condition of the axles, overrun brake and drawbar, along with corrosion on the frame and floor panel, matter most. Given the small payload reserve, the exact unladen weight of the specific variant should also be checked via the data plate. Spare parts for brakes, lighting and axles are available through the general trailer parts trade.

Sources: SpecCodex register, model data: Laverda (weitere Modelle)

Technical data

Dimensions and weights

Width2,150 mmcorrect
Unladen weight770 kgcorrect
Gross vehicle weight870 kgcorrect

Drivetrain and chassis

Wheels2correct
Top speed100 km/hcorrect

Frequently asked questions

How much does the Laverda AU 440 EU weigh?

The unladen weight is 770 kg.

What is the gross vehicle weight of the Laverda AU 440 EU?

870 kg.

Up to what speed is the Laverda AU 440 EU approved?

Approved up to 100 km/h.

When was the Laverda AU 440 EU built?

Production years: 1979.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.​⁠​​‌‍​⁠‍​​​‌⁠​‌‌‌‍​

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.

Check and complete the data →

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare