Lsu 2ATOHG-17-20
Built: 1988 · Series: Other models
More machines from model year 1988
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Lsu – other models: the collective page of trailers outside the named ranges, from the 2AO-8-12K to the 4ASDU-16-36 HG, 4,230–12,820 kg unladen weight, 18,000–52,000 kg gross weight
This page gathers the trailers and semi-trailers of the Lsu brand that the register could not assign to a named range. The type list runs from two- to four-axle versions such as the 2AO-8-12K, 3ASDU-16-27HG and 4ASDU-16-36 HG up to the 3 ATOHG-18-30, several of them listed more than once in minor spelling variants. By gross weight the types fall into EU vehicle class O4, that is over 10 tonnes, with widths just under 2.60 m, the usual European limit for road vehicles.
Read on 3 more paragraphs
The register lists here 26 versions with unladen weights from 4,230 to 12,820 kg and gross weights from 18,000 to 52,000 kg. Width runs from 2,450 to 2,600 mm, length from 9,550 to 12,600 mm.
Trailers and semi-trailers of this weight class work in heavy-haulage and construction traffic as well as in long-distance freight, where a high payload at comparatively low unladen weight is what matters; the span from just 4.2 to over 12.8 tonnes unladen weight shows that both light two-axle and heavy four-axle versions are on the books.
On a used purchase, the condition of chassis and axles, the braking system and the overrun coupling, tyre wear and, on tipper bodies, the tightness of the side boards all count; parts for older types are, depending on year of build, only available on the open market to a limited extent.
Technical data
Dimensions and weights
| Width | 2,500 mmcorrect |
|---|---|
| Wheelbase | 8,310 mmcorrect |
| Unladen weight | 6,460 kgcorrect |
| Gross vehicle weight | 37,500 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Lsu 2ATOHG-17-20 weigh?
The unladen weight is 6,460 kg.
What is the gross vehicle weight of the Lsu 2ATOHG-17-20?
37,500 kg.
Up to what speed is the Lsu 2ATOHG-17-20 approved?
Approved up to 100 km/h.
When was the Lsu 2ATOHG-17-20 built?
Production years: 1988.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
2A0-12-12
2A0-12-12
2AA-10-10
2AA-10-10
2AO-8-12K
2AO-8-12K
2ATOHG-17-20
3 ASDC-12-24
3 ASDC-12-24
3 ASDC-12-24
3 ATOHG-18-30
3AAC-10-18
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.