Kock B2N 720 150 300 20
Built: 1998 · Series: Other models
More machines from model year 1998
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Kock – other models: the collective page of trailers outside the named ranges, from single-axle to tandem versions, unladen weights 380 to 3,720 kg, gross weights 1,300 to 10,000 kg
Kock builds commercial trailers spanning light single-axle units to tandem versions in the medium payload segment; type names range from simple numeric codes such as 3000 to abbreviations such as GKT, OKT and PST for individual execution variants. This page gathers the trailers the register could not assign to a named range.
Read on 3 more paragraphs
The register lists here 8 versions with unladen weights from 380 to 3,720 kg, gross weights from 1,300 to 10,000 kg, lengths from 5,150 to 8,250 mm and widths from 1,590 to 2,550 mm.
With payloads from around one tonne to over six tonnes, the range covers both smaller commercial haulage and use in construction and landscaping; the varying axle configurations allow the trailer to be matched to towing weight and load volume. The variety of type names, from simple numeric codes to letter abbreviations, shows that Kock has reorganised its range several times over the years without fully abandoning the older designations.
On a used example, the condition of the axles and braking system counts, along with the function of the overrun coupling on the lighter models, rust on the frame and load floor, and the tightness of the side panels and tarpaulin; spare parts for axles and couplings are in this size class usually available independent of the maker and the condition of the mudguards and light mounts..
Sources: SpecCodex register, model data: Kock (weitere Modelle)
Technical data
Dimensions and weights
| Width | 2,020 mmcorrect |
|---|---|
| Wheelbase | 710 mmcorrect |
| Unladen weight | 470 kgcorrect |
| Gross vehicle weight | 2,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Kock B2N 720 150 300 20 weigh?
The unladen weight is 470 kg.
What is the gross vehicle weight of the Kock B2N 720 150 300 20?
2,000 kg.
Up to what speed is the Kock B2N 720 150 300 20 approved?
Approved up to 100 km/h.
When was the Kock B2N 720 150 300 20 built?
Production years: 1998.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.