Ketterer SAH 1021
Built: 2000 · Series: Other models
More machines from model year 2000
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Ketterer – other models: the collective page of trailers outside the named ranges, the SAH 1021 type, 2,440 to 24,340 kg unladen weight, 4,500 to 28,000 kg gross weight, 6,850 to 13,800 mm length
This page gathers the Ketterer trailers the register could not assign to a named range. Two of the three entries – Ketterer SAH 1021 and SAH 1021 – clearly denote the same type in different notation, while the third entry carries no name of its own. As with many smaller trailer brands, the programme is drawn from registration data, in which each model is listed individually with its technical values.
Read on 3 more paragraphs
The register lists here 3 versions with unladen weights from 2,440 to 24,340 kg, gross weights from 4,500 to 28,000 kg, lengths from 6,850 to 13,800 mm and widths from 2,500 to 2,550 mm.
The span from 4.5 to 28 tonnes gross weight reaches from the heavy version for cars and light trucks to a full semi- or drawbar-trailer combination; above 3.5 tonnes gross weight a BE licence is required at minimum, and C or CE for the largest versions. Lengths of up to nearly 14 metres match the size of truck trailers for general cargo or containers.
On a used example, the condition of axles and braking system, rust on frame and side rails, the function of the coupling or fifth-wheel, the state of side walls or body, lighting, and tyres and rims all count; on the heavier versions the brake electronics as well. Parts for such small brands usually run through independent trailer and commercial-vehicle workshops. Given the wide weight span, it is worth matching the actual payload against the intended tow vehicle before purchase.
Technical data
Dimensions and weights
| Length | 13,800 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 8,900 mmcorrect |
| Unladen weight | 24,340 kgcorrect |
| Gross vehicle weight | 28,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Ketterer KETTERER SAH 1021 weigh?
The unladen weight is 24,340 kg.
What is the gross vehicle weight of the Ketterer KETTERER SAH 1021?
28,000 kg.
Up to what speed is the Ketterer KETTERER SAH 1021 approved?
Approved up to 100 km/h.
What are the dimensions of the Ketterer KETTERER SAH 1021?
13,800 mm × 2,550 mm.
When was the Ketterer KETTERER SAH 1021 built?
Production years: 2000.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.