KAESER M43 PE – specifications
Built: 2015 · Series: Other models
Data for the version built 2015 · Data origin: Official register · sources
More machines from model year 2015
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Kaeser – other models: towable compressors outside the named ranges, the Mobilair series from M31 to M170, 685 to 2,800 kg unladen weight, 1.42 to 2.13 m width
This page gathers the Kaeser trailers the register could not assign to a named range – these are entirely towable compressors of the Mobilair series from the Coburg-based manufacturer Kaeser Kompressoren, rather than classic load trailers. The type designations consist of the letter M and a number denoting power or build size, such as M31, M38, M45, M64 or M170, supplemented with country-specific suffixes such as GB, PE, NL or CE.
Read on 3 more paragraphs
The register lists here 50 versions with unladen weights from 685 to 2,800 kg, gross vehicle weights from 850 to 2,800 kg and widths from 1,420 to 2,130 mm; length is recorded for 15 models and ranges from 2,730 to 6,850 mm.
Towable compressors of this size are used in construction, for sandblasting and cleaning work, and as mobile compressed-air supply on building sites and at events; the range from small site compressors to larger Mobilair versions covers a wide variety of delivery rates and pressures.
When buying a used towable compressor, what matters above all is operating hours and the service history of the compressor block, the condition of engine and cooling system, the tightness of hoses and connections, and the condition of the drawbar, axle and braking system of the trailer chassis; wear parts such as filters, oil separators and belts are sourced through Kaeser and independent compressor workshops.
Sources: SpecCodex register, model data: Kaeser (weitere Modelle), Kaeser Kompressoren (manufacturer)
Technical data
Dimensions and weights
| Width | 1,440 mmcorrect |
|---|---|
| Coupling-to-axle distance | 2,470 mmcorrect |
| Unladen weight | 774 kgcorrect |
| Gross vehicle weight | 850 kgcorrect |
Drivetrain and chassis
| Wheels | 2correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the KAESER M43 PE weigh?
The unladen weight is 774 kg.
What is the gross vehicle weight of the KAESER M43 PE?
850 kg.
Up to what speed is the KAESER M43 PE approved?
Approved up to 100 km/h.
When was the KAESER M43 PE built?
Production years: 2015.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
