Hardenberg B1500 – specifications
Built: 1987 · Series: Other models
Data for the version built 1987 · Data origin: Official register · sources
More machines from model year 1987
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Hardenberg – other models: the collective page of trailers outside the named ranges, from AT 12 through B1500 to BT 2000, 370 to 4,255 kg unladen weight, 1,500 to 14,000 kg gross weight
This page gathers the Hardenberg trailers the register could not assign to a named range. Listed here are the types AT 12, B1500 and BT 2000, with no shared numbering logic or model-year sequence readable from the names. As with many smaller trailer brands, the programme is drawn from registration data, in which each model is listed individually with its technical values.
Read on 3 more paragraphs
The register lists here 3 versions with unladen weights from 370 to 4,255 kg, gross weights from 1,500 to 14,000 kg and widths from 2,080 to 2,250 mm.
The span of gross weights runs from the light class towable behind a car up to heavy, multi-axle trailers as towed behind lorries and tractor units in commercial transport. The range reflects a model programme running from simple feeder trailers to load-bearing versions for hauling materials, without one single market niche standing out.
On a used example, the lighter versions call for checking axle, wheel-bearing and overrun-brake condition, the heavier ones additionally the brake system, axle assemblies and the frame for corrosion and cracks; lighting, the plug and tyres and rims count on all of them. For a brand with such a small model programme, parts usually run through independent trailer workshops rather than a maker's own network. On versions with an overrun brake, the adjustment of the brake linkage and the condition of the brake linings are also worth checking before the first drive.
Sources: SpecCodex register, model data: Hardenberg (weitere Modelle)
Technical data
Dimensions and weights
| Width | 2,250 mmcorrect |
|---|---|
| Unladen weight | 370 kgcorrect |
| Gross vehicle weight | 1,500 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Hardenberg B1500 weigh?
The unladen weight is 370 kg.
What is the gross vehicle weight of the Hardenberg B1500?
1,500 kg.
Up to what speed is the Hardenberg B1500 approved?
Approved up to 100 km/h.
When was the Hardenberg B1500 built?
Production years: 1987.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
