Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Geers › EG 20 M

Geers EG 20 M

Built: 1992 · Series: Other models

More machines from model year 1992

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

EG 20 M comes from the manufacturer Geers. According to the available register data, the vehicle dates from 1992. The trailer is 2,190 mm wide. Its kerb weight comes to 810 kg. The permitted gross weight is 2,000 kg. Top speed is 100 km/h. The Dutch vehicle register lists one example of this model.

Geers – other models: the collective page of light trailers outside the named ranges, including the Autoambulance for single-vehicle transport, 0.55 to 1.26 t unladen weight, up to 3.5 t gross weight

This page gathers the Geers trailers the register could not assign to a named range. The programme spans the EG range (EG 20 M, EG30), the 4M, M4 and T25 models, and the Autoambulance, a version for transporting a single vehicle. With unladen weights from 550 to 1,260 kg and gross weights from 2,000 to 3,500 kg, all seven models fall within the class of light, car-towable trailers.

Read on 3 more paragraphs

The register lists here 7 versions with unladen weights from 550 to 1,260 kg, gross weights from 2,000 to 3,500 kg, lengths around 8,150 mm and widths from 2,100 to 2,200 mm.

Light trailers of this class are used by trade businesses and private users for general haulage tasks, the Autoambulance additionally by classic-car owners and car dealers for moving a vehicle without a registration drive of its own. The EG range and the 4M, M4 and T25 models cover the usual spectrum of platform and drop-side trailers for trade and leisure use.

On used light trailers, the condition of the chassis matters, the overrun brake device and brake, axle and tyres, and lighting, and on the Autoambulance also the loading rails or ramp, lashing points and the condition of the deck. On longer-used trailers, the side-panel hinges and the drawbar are also worth checking for wear; spare parts run through the independent specialist trailer trade.

Sources: Kennwerte der Modelle Geers (weitere Modelle)

Technical data

Dimensions and weights

Width2,190 mmcorrect
Unladen weight810 kgcorrect
Gross vehicle weight2,000 kgcorrect

Drivetrain and chassis

Top speed100 km/hcorrect

Frequently asked questions

How much does the Geers EG 20 M weigh?

The unladen weight is 810 kg.

What is the gross vehicle weight of the Geers EG 20 M?

2,000 kg.

Up to what speed is the Geers EG 20 M approved?

Approved up to 100 km/h.

When was the Geers EG 20 M built?

Production years: 1992.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 6 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare