Ffb Feldbinder 39 – specifications
Built: 2008 · Series: Other models
Data for the version built 2008 · Data origin: Official register · sources
More machines from model year 2008
FFB Feldbinder – other models: the collective page of silo and tipper semi-trailers outside the named ranges, gross weights from 39,000 to 43,000 kg, unladen weights from 4,740 to 6,870 kg, lengths up to 13,460 mm
This page gathers the Feldbinder semi-trailers the register could not assign to a named range. The company, based in Winsen an der Luhe in Lower Saxony, builds silo, tank and tipper semi-trailers; type designations such as CONC 40.3 give the construction type, concrete or bulk goods marked with the code CONC, and the payload or size in the following number. Further codes such as KIP denote tipper semi-trailers, which carry an open tipping body instead of a silo vessel.
Read on 3 more paragraphs
The register lists here 5 versions with unladen weights from 4,740 to 6,870 kg, gross weights from 39,000 to 43,000 kg, lengths from 9,550 to 13,460 mm and a width of 2,550 mm.
With gross weights up to 43,000 kg and unladen weights under 7 tonnes, these are light silo and bulk-goods semi-trailers in the sense of an articulated combination, where a low unladen weight maximises payload for cement, grain or other bulk materials.
On used silo and tipper semi-trailers, the tightness of the vessel and valves, the condition of the compressor and air lines for pneumatic unloading, the frame and axle units, the brake system and corrosion and wear on the discharge cones and flaps from contact with bulk material all count. Tyres and lighting also belong to the checklist for these semi-trailers. A service history and vessel inspection records help assess the semi-trailer's condition.
Sources: SpecCodex register, model data: Ffb Feldbinder (weitere Modelle), Feldbinder Spezialfahrzeugwerke (manufacturer)
Technical data
Dimensions and weights
| Length | 13,460 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Coupling-to-axle distance | 9,100 mmcorrect |
| Unladen weight | 6,870 kgcorrect |
| Gross vehicle weight | 39,000 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Ffb Feldbinder 39 weigh?
The unladen weight is 6,870 kg.
What is the gross vehicle weight of the Ffb Feldbinder 39?
39,000 kg.
Up to what speed is the Ffb Feldbinder 39 approved?
Approved up to 100 km/h.
What are the dimensions of the Ffb Feldbinder 39?
13,460 mm × 2,550 mm.
When was the Ffb Feldbinder 39 built?
Production years: 2008.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
