Faga GG 303 – specifications
Built: 1994 · Series: Other models
Data for the version built 1994 · Data origin: Official register · sources
More machines from model year 1994
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Faga – other models: the collective page of trailers outside the named ranges, with GG 303, ZAA 18 and ZKK18, 2 to 18 t gross weight, 1.79 to 2.60 m width
This page gathers the Faga trailers the register could not assign to a named range – with such a small model programme this amounts to practically the whole catalogue of the brand. It lists the versions GG 303, ZAA 18 and ZKK18; the codes follow no single recognisable scheme. The values come from registration data, in which each model is listed individually with its technical figures.
Read on 3 more paragraphs
The register lists here 3 versions with unladen weights from 475 to 7,250 kg, gross weights from 2,000 to 18,000 kg, lengths from 9,850 to 9,990 mm and widths from 1,790 to 2,600 mm.
The gross weight range spans 2 to 18 tonnes, covering both light trailers towed behind cars or vans and heavy versions for truck combinations; lengths around 10 metres on the heavier versions point to semi-trailer or long-load body types. The brand thus covers a wide range of uses within a single, small model programme.
On a used example the points to check vary by version: on the lighter trailers, axle and wheel-bearing condition and the function of the overrun brake; on the heavy versions, the condition of axles, brakes and frame; rust on frame and drawbar, lighting, the plug, and tyres and rims matter throughout. Parts for such small brands mostly come through independent trailer workshops rather than a manufacturer network.
Sources: SpecCodex register, model data: Faga (weitere Modelle)
Technical data
Dimensions and weights
| Width | 1,790 mmcorrect |
|---|---|
| Coupling-to-axle distance | 860 mmcorrect |
| Unladen weight | 475 kgcorrect |
| Gross vehicle weight | 2,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Faga GG 303 weigh?
The unladen weight is 475 kg.
What is the gross vehicle weight of the Faga GG 303?
2,000 kg.
Up to what speed is the Faga GG 303 approved?
Approved up to 100 km/h.
When was the Faga GG 303 built?
Production years: 1994.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.
