Eduard PL
Built: 2010 · Series: Other models
Technical data
Dimensions and weights
| Length | 5,650 mmcorrect |
|---|---|
| Width | 2,120 mmcorrect |
| Wheelbase | 3,900 mmcorrect |
| Unladen weight | 570 kgcorrect |
| Gross vehicle weight | 2,700 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Eduard PL weigh?
The unladen weight is 570 kg.
What is the gross vehicle weight of the Eduard PL?
2,700 kg.
Up to what speed is the Eduard PL approved?
Approved up to 100 km/h.
What are the dimensions of the Eduard PL?
5,650 mm × 2,120 mm.
When was the Eduard PL built?
Production years: 2010.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
6022-4-PMB30-350
A4
A5
APOLLO 3500
AT 2720
AT-20
AT2720
ATLAS -4X2.0
ATLAS 3500
ATLAS PL 2720
ATLAS-5X2.0-3500KG
Atlas-6.0 X 2.0 - 3500 kg.
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.