Technical register for agricultural, construction and commercial machinery · sourced data
StartTrailersECOAIR › E 38

ECOAIR E 38

Built: 1996 · Series: Other models

More machines from model year 1996

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

E 38 comes from the manufacturer ECOAIR. According to the available register data, the vehicle dates from 1996. The trailer is 1,300 mm wide. The unladen weight is 860 kg. The permitted gross weight is 900 kg. Top speed is 100 km/h. It runs on 2 wheels. The Dutch vehicle register lists one example of this model.

Ecoair – other models: the collective page of site compressors on a trailer chassis outside the named ranges with types E, F and T, 780 to 1,880 kg unladen weight, up to 2,000 kg gross weight

Ecoair builds construction-site compressors on their own trailer chassis; this page gathers the versions outside the named ranges. Type designations follow three letter series – E (E 31, E 38), F (F 30, F 42, F 50 D, F 58, F 78, F 105, some with a D or G suffix for equipment variants) and T (T 30) – with the number after the letter denoting the size within the series.

Read on 3 more paragraphs

The register lists 19 versions here with unladen weights from 780 to 1,880 kg, permissible gross weights from 780 to 2,000 kg and widths from 1,280 to 1,840 mm.

As mobile compressor units for construction and road-building sites, the Ecoair trailers with gross weights up to 2,000 kg sit in a class that can still be towed behind typical site vehicles without extra requirements; the narrow widths up to 1,840 mm ease transport along tight site access roads.

For a used compressor trailer, the checklist covers the running hours and condition of the compressor unit, the tightness of the oil and compressed-air system, the condition of hoses and connections, and, as with any trailer, the overrun actuator, braking system and axle suspension for wear and corrosion. Spare parts for the compressor unit come from the manufacturer or specialist compressor dealers, with axles and the overrun actuator as generic AL-KO or Knott components.

Sources: Kennwerte der Modelle Ecoair (weitere Modelle)

Technical data

Dimensions and weights

Width1,300 mmcorrect
Unladen weight860 kgcorrect
Gross vehicle weight900 kgcorrect

Drivetrain and chassis

Wheels2correct
Top speed100 km/hcorrect

Frequently asked questions

How much does the ECOAIR E 38 weigh?

The unladen weight is 860 kg.

What is the gross vehicle weight of the ECOAIR E 38?

900 kg.

Up to what speed is the ECOAIR E 38 approved?

Approved up to 100 km/h.

When was the ECOAIR E 38 built?

Production years: 1996.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare