Eck N/A – specifications
Built: 2009–2011 · Series: Other models
Eck builds this trailer. According to the available register data, the recorded vehicles date from 2009 to 2011. Dimensions: 13,780 mm long and 2,550 mm wide. Empty, it weighs 8,720 kg. The permitted gross weight is 36,000 kg. Axle to axle, the wheelbase is 8,800 mm. It reaches up to 100 km/h. It runs on 12 wheels. According to the Dutch vehicle register, 2 examples of this model are on record.
Data for the version built 2009–2011 · Data origin: Official register · sources
More machines from model year 2009
Eck UT-2LN – heavy EU category O4 trailer with a 28,000 kg gross weight, 9,460 kg unladen weight, 18,540 kg payload, 14.00 m length, an 8.45 m axle spread and eight wheels
At a gross weight of 28,000 kg, the UT-2LN belongs to EU trailer category O4, the heavy trailers above 10 tonnes used in freight transport. Trailers in this category are fitted with compressed-air brake systems and load-dependent, multi-axle brake distribution.
Read on 3 more paragraphs
At an unladen weight of 9,460 kg, the payload comes to 18,540 kg. The eight wheels indicate a multi-axle group that spreads the high axle load across a correspondingly large number of contact points. At 14.00 m the UT-2LN counts among the longer trailers in its category, the 8.45 m axle spread takes up a good sixty per cent of that length, and at 2.60 m width the vehicle slightly exceeds the general 2.55 m envelope for road vehicles.
Towing combinations in this weight class require a category CE licence. The multi-axle brake system distributes braking force across all axles in the group so that a stable deceleration is reached even under uneven loading, and the axle group cushions the high payload through correspondingly robust suspension.
When buying used with eight wheels, it is particularly worth checking even wear across all tyres, the condition of the axle bearings and spring elements on each axle, the tightness of the air lines across the whole axle group, and the frame around the axle mounts for cracking. The coupling eye and its bearing are also worth a close look given the weight the trailer regularly carries.
Sources: SpecCodex-Register: Kennwerte des Modells Eck UT-2LN
Technical data
Dimensions and weights
| Length | 13,780 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Coupling-to-axle distance | 8,800 mmcorrect |
| Unladen weight | 8,720 kgcorrect |
| Gross vehicle weight | 36,000 kgcorrect |
Drivetrain and chassis
| Wheels | 12correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Are you the manufacturer or a dealer of this machine? Check the data and add missing figures — we mark your correction as manufacturer or dealer information.
Check and complete the data →Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: RDW — Dutch national vehicle register (retrieved August 2026) · Data sources and cross-checks
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.