Doosan 7/124-10/104
Built: 2017–2020 · Series: Other models
More machines from model year 2017
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Doosan – other models: a collector page for the South Korean group's towable compressors, generators and light towers, 17 versions from 7/25 to W3000, unladen weight 599 to 3,000 kg
This page gathers Doosan models the register could not assign to a named series – from towable compressors to the LIGHTSOURCE V9 light tower and the W3000 welder generator. Doosan Portable Power, which grew out of the Ingersoll Rand division Doosan acquired in 2007, mounts the equipment on single-axle trailer chassis for transport to site; compressor type codes such as 7/25 or 7/170 state the delivery rate and pressure of that line. The smaller compressors often serve as additional fleet for equipment-rental firms working with builders and municipalities.
Read on 3 more paragraphs
The register lists 17 versions with unladen weights from 599 to 3,000 kg and gross weights from 950 to 3,500 kg. Lengths range from 3,490 to 4,940 mm, widths from 1,360 to 2,270 mm.
Towable compressors, generators and light towers like these power construction sites, events and emergency use away from the grid; Doosan competes here with Atlas Copco, Kaeser and Sullair.
When buying used, check the engine's running hours, the condition of the compressor block or generator, the chassis drawbar and brakes, and the tightness of the oil and fuel systems; parts and service run through the Doosan Portable Power dealer network. On light towers, also check the condition of the lifting mast and floodlights, and on welder generators the generator and welding sides separately.
Sources: Kennwerte der Modelle Doosan (weitere Modelle), Doosan Portable Power
Technical data
Dimensions and weights
| Length | 4,060 mmcorrect |
|---|---|
| Width | 1,980 mmcorrect |
| Wheelbase | 2,610 mmcorrect |
| Unladen weight | 2,385 kgcorrect |
| Gross vehicle weight | 2,700 kgcorrect |
Drivetrain and chassis
| Wheels | 2correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Doosan 7/124-10/104 weigh?
The unladen weight is 2,385 kg.
What is the gross vehicle weight of the Doosan 7/124-10/104?
2,700 kg.
Up to what speed is the Doosan 7/124-10/104 approved?
Approved up to 100 km/h.
What are the dimensions of the Doosan 7/124-10/104?
4,060 mm × 1,980 mm.
When was the Doosan 7/124-10/104 built?
Production years: 2017–2020.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.