Technical register for agricultural, construction and commercial machinery · sourced data
StartTrailersDe Witte Smid › ATS 1200

De Witte Smid ATS 1200

Built: 1984 · Series: Other models

More machines from model year 1984

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

ATS 1200 comes from the manufacturer De Witte Smid. According to the available register data, the vehicle dates from 1984. The trailer is 1,720 mm wide. The unladen weight is 520 kg. The permitted gross weight is 1,200 kg. The wheelbase measures 720 mm. Top speed is 100 km/h. The Dutch vehicle register lists one example of this model.

De Witte Smid – other models: the collective page of trailers outside the named ranges, with the ATS, AST, AWK and PL type series from 1,000 to 3,500 kg gross weight

This page gathers the De Witte Smid trailers the register could not assign to a named range. The line-up consists of small and tandem-axle trailers for the class up to 3.5 tonnes, whose type codes combine two to three letters with a number – ATS, AST, AT, ATO, AWK, PL, PLT, EA, HT, KC, VA and C0N are the most common codes in the range. On most types such as the ATS 2500, AST 3000 or PLT 3500, the attached number matches the gross weight in kilograms; the AWK 1000 and ATO 2000 follow the same pattern at the lower end of the range.

Read on 3 more paragraphs

The register lists here 43 versions with unladen weights from 280 to 2,830 kg, gross weights from 1,000 to 3,500 kg and widths from 1,450 to 2,550 mm.

Trailers of this weight class run as multi-purpose, tipping and transport trailers behind cars and light commercial vehicles – for building materials, machinery, boats or agricultural equipment. The staggered weight classes from 1,000 to 3,500 kg thus cover the whole range from the small single-axle trailer to the tandem-axle for the BE trailer category.

On a used trailer of this class, the condition of chassis and drawbar, ball coupling and overrun brake device, axles and brake linings and drums, sides and load floor count; rust on the frame and mudguards is the most common fault. Parts for axles, couplings and lighting are available through the general trailer trade.

Sources: Kennwerte der Modelle De Witte Smid (weitere Modelle)

Technical data

Dimensions and weights

Width1,720 mmcorrect
Wheelbase720 mmcorrect
Unladen weight520 kgcorrect
Gross vehicle weight1,200 kgcorrect

Drivetrain and chassis

Top speed100 km/hcorrect

Frequently asked questions

How much does the De Witte Smid ATS 1200 weigh?

The unladen weight is 520 kg.

What is the gross vehicle weight of the De Witte Smid ATS 1200?

1,200 kg.

Up to what speed is the De Witte Smid ATS 1200 approved?

Approved up to 100 km/h.

When was the De Witte Smid ATS 1200 built?

Production years: 1984.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare